Please try the following sections and make sure you calibrate both tablets through wacomcpl.
Section "InputDevice" Identifier "stylus" Driver "wacom" Option "Device" "/dev/input/wacom" Option "Type" "stylus" Option "USB" "on" Option "ScreenNo" "0" Option "TwinView" "horizontal" EndSection Section "InputDevice" Identifier "stylus1" Driver "wacom" Option "Device" "/dev/input/wacom1" Option "Type" "stylus" Option "USB" "on" Option "ScreenNo" "1" Option "TwinView" "horizontal" EndSection Ping On 2/16/07, tallgrass <[EMAIL PROTECTED]> wrote: > > I'm so close and yet so far getting two side by side Cintiq 21UX's working > together. The nVidia TwinView part of it works fine. I can get the stylus > working on the left screen fine. Nothing I do seems to get the stylus on > the right screen to work. Trial and error is not working. Someone who > knows what they're doing can probably help. > > I rebuilt an RHEL4 kernel as per instructions giving me 2.6.9-prep. I left > /etc/udev/rules.d/10-wacom.rules alone because it seemed OK. When I boot > up, I get two devices created: /dev/input/wacom -> event2 and > /dev/input/wacom1 -> event3. > > In my xorg.conf file, Section "ServerLayout", among other things I have: > InputDevice "stylus" "SendCoreEvents" > InputDevice "stylus1" "SendCoreEvents" > > Then: > Section "InputDevice" > Identifier "stylus" > Driver "wacom" > Option "Device" "/dev/input/wacom" > Option "Type" "stylus" > Option "USB" "on" > Option "BottomX" "174400" > Option "TwinView" "none" > EndSection > > Section "InputDevice" > Identifier "stylus1" > Driver "wacom" > Option "Device" "/dev/input/wacom1" > Option "Type" "stylus" > Option "USB" "on" > Option "BottomX" "174400" > Option "TwinView" "none" > EndSection > > I've tried various combinations of Option "TwinView" "horizontal", Option > "ScreenNo" "1", etc., but the above comes closest to what I'm hoping for. > As it stands, when I move the pen on the right screen, it displays the > correct position except it's on the left screen, i.e. all the scaling is > good, it's just showing up on the wrong screen. > > Any ideas of what I'm doing wrong? > Thanks, > Norbert > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Linuxwacom-discuss mailing list Linuxwacom-discuss@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxwacom-discuss
