One more precision, the hard drive I am trying to install pfSense on is a 
Toshiba MK2576GSXZ 


Thanks. 

Le 19 sept. 2011 à 16:41, bsd a écrit :

> Hello, 
> 
> I am facing a problem installing a lanner 7522 (celeron based). 
> 
> The device is based on the following hardware specs : 
> 
> Processor: Intel Celeron M 1GHz
> Chipset: Intel 910GMLE + ICH6M
> 
> 
> 
> --- 
> 
> I have only managed to install the device with an embedded kernel. 
> The multiproc refuses to boot for some reason (probably console redirection). 
> 
> It is not in itself a problem, but when I reboot the device I have problem 
> mounting my HDD because the partition is not detected / mounted. 
> 
>> […]
>> gen1.1: <Intel> at usbus1
>> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>> ad0: 238475MB <TOSHIBA MK2576GSXZ GS001A> at ata0-master UDMA100 SATA
>> uhub0: 2 ports with 2 removable, self powered
>> uhub1: 2 ports with 2 removable, self powered
>> ugen0.2: <vendor 0x04d9> at usbus0
>> Loader variables:
>> vfs.root.mountfrom=
>> vfs.root.mountfrom.options=rw
>> 
>> Manual root filesystem specification:
>> <fstype>:<device>  Mount <device> using filesystem <fstype>
>>                     eg. ufs:/dev/da0s1a
>>                     eg. cd9660:/dev/acd0
>>                     This is equivalent to: mount -t cd9660 /dev/acd0 /
>> 
>> ?                  List valid disk boot devices
>> <empty line>       Abort manual input
> 
> Then I have to manually specify the device to boot from : 
> 
>> mountroot> ufs:/dev/ad1s1a
>> 
> 
> 
> Then It is ok. 
> 
> ---
> 
> Weired thing is that /etc/fstab seems to be correct : 
> 
>> [2.0-RELEASE][[email protected]]/root(1): more /etc/fstab
>> # Device                Mountpoint      FStype  Options         Dump    Pass#
>> /dev/ad1s1a             /               ufs     rw              1       1
>> /dev/ad1s1b             none            swap    sw              0       0
> 
> 
> 
> I have updated /boot/loader.conf.local with these settings : 
> 
>> [2.0-RELEASE][[email protected]]/root(2): more /boot/loader.conf.local
>> kern.cam.boot_delay=10000
>> vfs.root.mountfrom="/dev/ad1s1a"
> 
> 
> I don't know where to look right now… 
> 
> And I need a 100% working setting. 
> 
> 
> Any idea ? 
> 
> ––––––––––––––––––––––––––––––––––––––––––––––
> ---------> Grégory Bernard Director <---------
> ---------------> www.osnet.eu <---------------
> --> Your provider of OpenSource appliances <--
> ––––––––––––––––––––––––––––––––––––––––––––––
> OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO
> _______________________________________________
> List mailing list
> [email protected]
> http://lists.pfsense.org/mailman/listinfo/list


––––––––––––––––––––––––––––––––––––––––––––––
---------> Grégory Bernard Director <---------
---------------> www.osnet.eu <---------------
--> Your provider of OpenSource appliances <--
––––––––––––––––––––––––––––––––––––––––––––––
OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO

_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to