I have two identical routers built with supermicro mother boards using 2 onboard intel nics plus two nic ports on an intel pci-card.
The issue I am having is that it appears that CARP is locking both units up at the same time. When the issue occurs I can not reach either router on their direct public or private address as soon as I do a hardware rest they come back to life. When I plugged a console cable in I was able to get access to the shell but I did not have the time to do any diag. I just issued a reboot command. We are on the nanobsd build. Does anyone have any ideas. We have seen this on two different production installs. We need to come up with a solution or we will be unable to use CARP at all. We did not see this kind of CARP issue with 1.2.3 but we also had a much simpler install. Right now we have 8 public CARP addresses and 10 private CARP addresses each on their own private VLAN. Please any input would be apperciated. Thanks zktech
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
