I have a PFS 1.2.3 running with two NIC cards at a remote location. I have a Cisco 1800 series and both connected VIA IPSEC. When I try and do any browsing after connecting the tunnel, it looks like the Cisco is pushing traffic to the PFS. It is a VERY simple setup. Both route their own traffic.
1.1.1.1 is to the first VPN, which works when both are up 2.2.2.2 is the second tunnel which works, but is getting redirected traffic 3.3.3.3 is the loopback in the Cisco 4.4.4.4 is the external address for the cisco Crypto_map2 is where some traffic ends up and never goes out the correct gateway, or hangs inside the network when doing a trace route. Is there a setting issue here between the two VPN's? Here's a PDF of the current setup. http://www.katotech.com/files/Meshurle.pdf Marc R. Meshurle, Jr. Owner/Senior Engineer/MCP Kato Technology Solutions, Inc. Exton, PA. 19341 610-280-3566 610-280-7007 (fax) www.katotech.com<http://www.katotech.com/> [Description: cid:[email protected]] [Description: cid:[email protected]] Click here for support from Marc Jr<http://www.katotech.com/support/ktssupport.exe>
<<inline: image001.gif>>
<<inline: image002.gif>>
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
