And what about the limitation that "Is not possible to connect more than one PPTP client to the same PPTP server, using a single WAN ip address". I read somewhere that it was a limitation involving PF/nat/pptp on PFsense 1.2.3, but i`m not able to connect more than 1 client on PFsense 2.0 also.
Can you confirm this? ----- Original Message ----- From: "Jim Pingle" <[email protected]> To: "pfSense support and discussion" <[email protected]> Sent: Tuesday, November 1, 2011 3:34:54 PM Subject: Re: [pfSense] PPTP client On 11/1/2011 1:07 PM, Diego Barrios wrote: > I can`t figure out how to configure pfsense 2.0 to act as a PPTP client > (I have a Win2003 server on the other point) > > I know there is an interface type called "PPTP" but i have some questions: > > Why can`t i leave the field "ip address" blank since the ip address is > provided by my pptp server Win2003? > > Anyway, even if i put a valid ip address in my VPN range, the interface > remains always "down" and there`s nothing on "System logs" to help me > solve the problem. > > Can someone provide some information about this feature or point me to > some doc on the internet? That is not meant as a PPTP VPN client, but as a PPTP client for ISPs which require PPTP to connect for Internet access. It works similarly to PPPoE in that regard. Last I knew, that limitation was still in effect. Jim _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
