Hi there,
i recently installed pfsense 2.0.
My network config is
DSL1(192.168.10.1) DSL2(192.168.11.1)
|________________________|
|
(WAN )
(pfSense )
( LAN )
|
[special computers] ......... [rest]
DSL1:
IP 192.168.10.1/24
pfSense: 192.168.10.10
DSL2:
IP 192.168.11.1/24
pfSense: 192.168.11.10
My problem is: I want to use DSL1 as normal internet connect und DSL2 for
special computers in my network. Lets say they have IPs like 10.10.10.50 -
10.10.10.70. These special computers should go out on DSL2 to any host in the
internet.
I tried to manage that. I set the manual outbound nat (DSL2 IP is an Virtual IP
alias on WAN, DSL1 is WAN and set two routes in routing tab) to use the DSL2
for the special computers but it doesn't worked.
These computers have not any internet in this configuration, so I guess the
outbound nat rule is active.
I had to disable monitoring for DSL2 because in the "apinger.conf" there the
wrong "srcip".
I tried to put a second default route with a higher metric, but that seems not
be possible.
What else can I do?
Is my concept wrong or do I miss something?
Any help would be appreciated.
Best regards
--
carlo blohm | systemadministrator
zweimaleins | werbeagentur gmbh
elbestrasse 28/29 | 12045 berlin
fon (030)61 10 86 -272 | fax -20
[email protected]
www.zweimaleins.de
Geschäftsführung: Alexander Stendel
Amtsgericht Charlottenburg | HRB: 112415 B
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
