Sorry, it is in the wiki on the FreeRadius site. Regards,
Daniel Davis -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of bsd Sent: Thursday, 15 December 2011 7:10 PM To: pfSense support and discussion Subject: Re: [pfSense] 802.1X VLAN function and switch support Le 15 déc. 2011 à 01:20, Daniel Davis a écrit : > This is generally supported on nearly all reasonable managed switches these > days (not always on the el-cheapo 'web-managed' switches). The switch really > doesn't do much other than forward authentication requests and then act on > the authorisation response. As long as the authentication server (NAC) can > return the correct IETF attributes such as Tunnel-Type, Tunnel-Medium-Type > and Tunnel-Private-Group-Id it will generally work. Ok, I guess I'll have to give It a try with the switch I am using. > This is all supported by FreeRadius and well documented in the wiki with > example configs for numerous different switch manufacturers. I am sorry but I can not find any link about this specific topic in the doc.pfsense.org section or in the dev section - can you be more specific ? Which wiki are you refering to ? Thanks for your reply. > > Regards, > > Daniel Davis > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] > On Behalf Of bsd > Sent: Thursday, 15 December 2011 7:47 AM > To: pfSense support and discussion > Subject: [pfSense] 802.1X VLAN function and switch support > > Hi, > > I am bit off topic for the pfSense list, but since I want to be compliant > with the FreeRadius package deployed on the pfSense system. I guess It is ok > to ask that question here. > > > I want FreeRadius to provide distinct VLANs to each of my clients based on > the parameters defined in the FreeRadius settings. I am not certain that a > lot of switches are compatible with this function, most of them provide > 802.1X authentication, but can they automatically set the VLAN once the > client has authenticated ? > > Can they provide a default VLAN for failed auth? > > > As stated on the package, the switch should understand the following > parameters : > > Tunnel-Type = VLAN > Tunnel-Medium-Type = IEEE-802 > Tunnel-Private-Group-ID = "My_ID" > > > Any feed back on implementing this VLAN attribution feature with FreeRadius > and xxx switch will be welcome. > > Switch brands supporting this feature is also of interest. > > > Thanks. > > > ---------------------------------------------- > ---------> Grégory Bernard Director <--------- > ---------------> www.osnet.eu <--------------- > --> Your provider of OpenSource appliances <-- > ---------------------------------------------- > OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list > > > -- > This message has been scanned for viruses and dangerous content by > mail.lasseters.com.au, and no infections were found. > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list ---------------------------------------------- ---------> Grégory Bernard Director <--------- ---------------> www.osnet.eu <--------------- --> Your provider of OpenSource appliances <-- ---------------------------------------------- OSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetOSnetO _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list -- This message has been scanned for viruses and dangerous content by mail.lasseters.com.au, and no infections were found. _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
