You mentioned using siproxd... I don't use this and VOIP is fine at the site I 
use it at.

Have you tried disabling sipproxd?


From: [email protected] [mailto:[email protected]] On 
Behalf Of Zvonimir Mileta
Sent: 16 December 2011 12:18
To: [email protected]
Subject: Re: [pfSense] asterisk behind pfsense

yes

interface WAN , any, static port yes and everything else to *
________________________________
From: [email protected]
To: [email protected]
Date: Fri, 16 Dec 2011 12:15:24 +0000
Subject: Re: [pfSense] asterisk behind pfsense
Have you enabled Manual Outbound Nat Rule Generation?




From: [email protected] [mailto:[email protected]] On 
Behalf Of Zvonimir Mileta
Sent: 16 December 2011 12:14
To: [email protected]
Subject: [pfSense] asterisk behind pfsense

Hey guys

perhaps someone over here can give me a hand.

I replaced my PFBox with netgate appliance running 1.2.3 and now my asterisk 
wont get calls out

I dont see anything being blocked by the FW but I dont have any sound nor I see 
anything coming out of my asterisk box

I do see

172.16.3.1:5060 <- 172.16.3.221:5060

NO_TRAFFIC:SINGLE

but don't know how to fix this since I have sipproxd installed and everything 
in place as it was before I replace pfsense's box.

any help Id really appreciate.

thanks


regards,
zvonimir

_______________________________________________ List mailing list 
[email protected] http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to