On 12/15/2011 3:16 PM, James Perry wrote: > I've got a REST API based application sitting behind a pfSense Load Balancer > (works great!). I want to perform some scaleability testing using pfSense's > traffic shaping capabilities. I was able to configure pfSense to limit total > throughput for a given interface but what I really want to do is limit > throughput for a specific client port. I don't want to limit total > throughput. For example, I have 10 clients hitting the LB. I want each > client limited to 56kb. The total throughput however would be 10 x 56Kb > (560Kb). > I have a load-gen application running on another machine that creates > multiple threads with each one hitting the LB. All of these requests will > come from the same IP destined for the same IP/Port on the LB. The only > distinguishing thing will be the source port. > Is this possible with pfSense?
Make a limiter pair masked by source address/destination address and then use a firewall rule specific to one port to direct things into that pair of limiters for in/out. By using a separate pair of limiters for each port you want, this can be achieved. Not as easy as if we had a port masking option in the GUI, but it gets the job done. Jim _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
