I will add the errors only show in the GUI ticker after a reboot of the box.
How can I force a reload of the rules like on boot without having to reboot the box? Ron Lemon -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ron Lemon Sent: Friday, December 23, 2011 11:27 PM To: pfSense support and discussion Subject: Re: [pfSense] Traffic Shaper Errors > Are you on 2.0.1? There were some issues in the wizards fixed. Hi Chris, Yes I am on 2.01 and have now removed traffic shaper and then rerun the multi wan single lan (with 1 wan) wizard and I am still getting errors. Dec 24 04:08:11 php: : There were error(s) loading the rules: bandwidth for qInternet higher than interface /tmp/rules.debug:71: errors in queue definition parent qInternet not found for qACK /tmp/rules.debug:72: errors in queue definition parent qInternet not found for qOthersHigh /tmp/rules.debug:73: errors in queue definition parent qInternet not found for qOthersLow /tmp/rules.debug:74: errors in queue definition pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [71]: queue qInternet on em1 bandwidth 19922.944Kb hfsc ( ecn , linkshare 19922.944Kb , upperlimit 19922.944Kb ) { qACK, qOthersHigh, qOthersLow } Dec 24 04:08:11 php: : New alert found: There were error(s) loading the rules: bandwidth for qInternet higher than interface /tmp/rules.debug:71: errors in queue definition parent qInternet not found for qACK /tmp/rules.debug:72: errors in queue definition parent qInternet not found for qOthersHigh /tmp/rules.debug:73: errors in queue definition parent qInternet not found for qOthersLow /tmp/rules.debug:74: errors in queue definition pfctl: Syntax error in config file: pf rules not loaded The line in question reads [71]: queue qInternet on em1 bandwidth 19922.944Kb hfsc ( ecn , linkshare 19922.944Kb , upperlimit 19922.944Kb ) { qACK, qOthersHigh, qOthersLow } Ron -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Buechler Sent: Friday, December 23, 2011 1:40 PM To: pfSense support and discussion Subject: Re: [pfSense] Traffic Shaper Errors On Fri, Dec 23, 2011 at 1:16 PM, Ron Lemon <[email protected]> wrote: > > Sure I can try. I had disabled the traffic shaper and then re-run the wizard > through the GUI once before in hopes of getting rid of the error but that did > not seem to help either. Since most help posts on the shaper highly > recommended the use of the wizards for a first crack I figured I should use > them. I guess I will do so digging to see what I need to manually set them > up. > > Thanks again. I wonder if anyone else used the multi-wan, single lan wizard > and had issues? > Are you on 2.0.1? There were some issues in the wizards fixed. _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
