Am 02.02.2012 10:08, schrieb Bart Grefte:
Okay :)
Hmm, so you did not use InSSIDer? That program picks up a lot more
networks than the standard wireless tools available in Windows (or any
other OS I believe).
If InSSIDer is not able to find it, then you're AP is most likely not
active for some reason.
*Van:*[email protected]
[mailto:[email protected]] *Namens *Jürgen Echter
*Verzonden:* donderdag 2 februari 2012 9:20
*Aan:* [email protected]
*Onderwerp:* Re: [pfSense] Setting up an Access Point with Dlink
DWL-G122 USB
Hi,
sure its not hidden ;)
also i tried an Android App and my Netbook if it finds my network, no way.
so i'll digg in the logs.
see you
Am 01.02.2012 20:33, schrieb Bart Grefte:
Have you maybe set the SSID to be hidden? Can't direct you to the
exact location of the setting since I currently do not use pfSense but
it should be on the page with al de Access Point related settings.
What you can try is run InSSIDer on a computer with wifi, see if it
finds you're wireless network.
What you can also try is checking pfSense's logs, see if anything
wifi-related pops up in there.
*Van:*[email protected]
<mailto:[email protected]>
[mailto:[email protected]] *Namens *Jürgen Echter
*Verzonden:* woensdag 1 februari 2012 19:36
*Aan:* [email protected] <mailto:[email protected]>
*Onderwerp:* [pfSense] Setting up an Access Point with Dlink DWL-G122 USB
Hi,
i'm trying to set up an AP with my Dlink DWL-G122.
Im as far as:
- setting up the device as ap
- ifconfig -a shows the device
*WLAN interface (run0)*
*Status*
up
*MAC address*
f0:7d:68:69:d6:b1
*IP address*
192.168.1.1
*Subnet mask*
255.255.255.0
*Media*
autoselect mode 11g <hostap>
*Channel*
6
*SSID*
test234
*In/out packets*
0/0 (0 bytes/0 bytes)
*In/out packets (pass)*
0/0 (0 bytes/0 bytes)
*In/out packets (block)*
0/0 (0 bytes/0 bytes)
*In/out errors*
0/0
*Collisions*
0
but i don't see any test234 network?!?!
where could i have a look?
greetings and thanks
juergen
_______________________________________________
List mailing list
[email protected] <mailto:[email protected]>
http://lists.pfsense.org/mailman/listinfo/list
Ok, here we go :)
System Log Firewall:
Feb 2 21:55:24 hostapd: run0_wlan0: WPA rekeying GTK
System Log System:
Feb 2 21:55:10 kernel: ugen1.2: <Ralink> at usbus1 (disconnected)
Feb 2 21:55:10 kernel: run0: at uhub1, port 2, addr 2 (disconnected)
Feb 2 21:55:15 kernel: ugen1.2: <Ralink> at usbus1
Feb 2 21:55:15 kernel: run0: <Ralink 11g Adapter, class 0/0, rev
2.00/1.01, addr 2> on usbus1
Feb 2 21:55:15 kernel: run0: MAC/BBP RT3070 (rev 0x0201), RF RT2020
(MIMO 1T1R), address f0:7d:68:69:d6:b1
Feb 2 21:55:15 kernel: run0: firmware RT2870 loaded
and the inSSIDer thing isn't working here, not working with wine and no
windows around. sorry.
greets
juergen
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
