On 3/5/2012 4:13 PM, Christoph Hanle wrote:
On 05.03.2012 15:21 - Dickie Bradford - wrote:
I have a pfsense 2.0.1 -Release (i386) it has dual wans (wan &
wan2(opt1)) its been working great, but last night I had to change the
ip address and gateway for wan and since this change i cannot route
anything out of wan interface, wan2 still works fine. I had had this
issue once before and to get around it I just reloaded pfsense and
started over but that isnt really an option this time.
[...]
Please let me know what else I can provide to help track this issue
down.
Looks like an issue with the arp cache on the switch or router at the
WAN interface. A reboot of the attached equipment can resolve the isuue.
bye
Christoph
Thank you
Dickie
Well, I pulled the plug on the cable modem for over 5 mins, and still no
luck. I am able to ping anything local to this subnet, but nothing
outside, it seems like a routing / gateway issue, but unsure really what
to look for next. Like I said before, I have had this happen in the
past, going from a private ip on the wan to a public ip and with the
same result, and in the end last time, I had to reload pfsense.
I also did check the NAT and they are automatically created
Anything else I can check?
Thnx
Dickie
--
Dickie Bradford
Never-Enuff Internet
D12 Networks
P.O.Box 426
Colver, Pa 15927-0426
http://www.Never-Enuff.net
http://www.D12Networks.com
Toll Free: 1-800-647-3145
Local: 814-569-1934
The man who sais it cannot be done, should not interupt
the man who is trying to do it!
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
