On 9 mrt. 2012, at 17:47, Gavin Will wrote: > Hi there, > > I have 2 internet connections. Fibre and ADSL Line. I also have 2 PFsense > Boxes one for each connection. > > Fibre goes to my main network, The ADSL line has a crappy ISP supplied router > and I have 5 public ips on this. I connect another PF Sense box up to the > ADSL router and set it to DMZ and therefore have a guest network on a single > public IP. > > I have another cable from the ADSL router ( again DMZ) to the 3rd (or 2nd wan > interface depending on how you see it)Interface on our main PFsense Box I > want to keep this as a failover line or possibly load balance. > > I would like to get rid of the ISP router and simply have 2 PFsense boxes. 1 > on the main network and the guest one (receiving the 5 public IPS) supplying > guest internet but then having a cable coming out to go into the main PFsense > and have it as failover on one of the remaining 4 public IPs. > > Is this possible? If I add another interface in Guest PF sense and then put > that into the main PF sense router and have going back to the main router? > > I realise it may be awkward to explain.
If I understand it correctly you want the PFsense to do the ADSL signaling. For that you need an ADSL interface adapter. For as I know PFsense does not support ADSL interface cards. I've done this in the past but couldn't use PFsense as "ADSL modem"/router/firewall. Kind regards, Pim van Stam > > Cheers > > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
