Hello everyone

First please forgive my poor english and my lack of knowledge on the matter.

I'm tryinng to create the following proof of concept:

equipement:
2 access points (with ip 192.168.50.3 and 192.168.88.1)
and one pfsense verison 2 running in a virtualbox setup with 2 bridged
networking adapters. (host is lubuntu 11.10)
and one vlan capable switch

configuration: default install with two interfaces one lan (le0) and
one wan(le1)
lan ip:20.20.20.244
wan ip:20.20.246

I want to create two vlans one for each ap

problem: if I setup the aliases with ifconfig from shell everything
works fine i can reach both aps
(and i suppose from there  i can setup two vlans from the command line
and with the appropriate configuration to the switch i can have what i
need)

but if i setup(what i think is) the same thing from the web it does nothing.

the steps i take are the following:

firewal->virtual ips ->add->Type: Ip alias,Interface: Lan,Ip address:
192.168.50.4->save->apply
the other one is similar with different ip

with this i cant even ping
and as far as i understand there is no special firewall rule to block
icmp requests(or anything on the default setup) on lan


thank you for your time
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to