Hi,
I'm running several pfSense ALIX Boxes at different locations. Each box
has a direct Internet connection (WAN) and runs OpenVPN Tunnels to other
sites. Works all fine.
Now I want to route all Internet-bound traffic of one (and only one!)
host H from site A through site B's pfSense box to the Internet. Is
there a way to do this?
I tried setting up a special outbound NAT rule for H at site A's
pfSense box, which essentially is <H's IP>/32 -> <Tunnel to site B
Interface IP>. But this did not have any effect.
Of course there is another NAT rule already in place that translates
anything from site A's private network to the local WAN address.
However, I put the special NAT rule for H as the first in the NAT rule
list, hoping that it matches first and will therefore be preferred.
However, if I traceroute from H to a machine outside (say 8.8.8.8) I can
still see the traffic going out through site A's WAN interface - never
getting into any tunnel.
The tricky bit is that host H's traffic is for the Internet. I can
reach hosts at other sites without problems (static routes and tunnel
NATs is place).
Has anyone here done this before? I would greatly appreciate some
advice on this...
Cheers,
Nadine
--
NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone!
Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
