Hi folks:
Have pfSense 2.0.1 stable installed on a machine we are using for
testing. 2x em network ports. Have em0 configured as WAN with IP
10.100.241.121/16, and em1 configured as LAN with IP 192.168.3.1/16.
I can reach the LAN port with ssh/others easily. No issues. I turned
on ICMP response on the WAN, and can ping that as well.
Ok. Want to set up a simple external port forward from WAN->LAN
(specific IP on LAN). Logged in through GUI, and set this up
WAN TCP * * WAN net 22 (SSH) 192.168.1.171 22 (SSH)
This host uses a different default gateway ... 192.168.1.1/16 . I can
(and have) set up a virtual machine on the 192.168.3.0/16 net using the
3.1 machine as a gateway, and redirected ssh there. This works, fine as
it turns out.
My question is, how (if at all) can I configure pfSense to handle the
case where it isn't the primary gateway? That is, its being used as a
router for external traffic, but the primary gateway is on a different
router. Do I need to add a specific route back on the client side, or
is this something pfSense can automagically handle?
--
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics Inc.
email: [email protected]
web : http://scalableinformatics.com
http://scalableinformatics.com/sicluster
phone: +1 734 786 8423 x121
fax : +1 866 888 3112
cell : +1 734 612 4615
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list
