Dear All, I am trying to implement a wireless network on my corporate environment using, Authentication by Domain Controller windows AD & Radius on same Server as well with Pfsense Captive Portal! ***Thanks to you guys for the help, I have done that in my testing zone!
*ABOUT My Corporate Network: *Our Corporate network is pretty much complicate to me. Its back-end is powered by a Linux DHCP, Squid Proxy, Cisco Firewall & Layer 3 Switch (Core Switch) which has 19 Vlans and all Vlans are trucked and distributed over the network using manageable Dlink switches. Vlans are 5 to 95 and the Vlan I'm intended to use is Vlan10 which is configured in the Layer 3 Switch as a 'Guest Vlan'. Vlan5 is for Data Center, which gives IP range: 192.168.1.xxx & Vlan10 (GuestVlan) IP is 192.168.2.xxx! And goes so on according to VlanID! Our Network is more like a Campus Area Network. We have 5 separate building in the city connected by Fiber Optic Cable Provided by 3rd Party. So Vlan10 will be distributed across the network as like other Vlans through trunk ports! *About implementation:* *I want the Output from pfsense should give:* * * 1. Pfsense should’ve WAN of Vlan5 as all the servers in Datacenter are in that range of IP 2. WAN from Core Switch Vlan10 (WAN from vlan5 & 10 may be dual WAN or something?) 3. LAN only Vlan10 4. LAN output Vlan tagging and trucking enabled to distribute across the network 5. Pfsense should be able to talk Windows AD & Radius Server 6. Any user connected to Vlan10 should pass through captive portal & radius Server *So above noted 6 points are what I intended to achieve! So Please guys help me on this **:)**. Hope I have given Info! *
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
