>-----Original Message----- >From: [email protected] [mailto:[email protected]] >On Behalf Of Drew Lehman >Sent: August-14-12 11:50 PM >To: [email protected] >Subject: [pfSense] VLAN > >I'm trying to do a guest wireless using a VLAN. I have pfsense 2.01 and a HP >switch 2910AL. I setup the VLAN on my LAN (192.168.10.x) port and have it set >>to offer DHCP (192.168.11.x). I thought i was off that >192.168.11.1 was an offered start address for the DHCP. I set >192.168.11.1 as the gateway address for the VLAN. I setup a VLAN on the >switch with the same VLAN number and the WAP has a guest SSID using the same >>VLAN number. Did I set this up correctly on the pfsense side? >_______________________________________________ >List mailing list >[email protected] >http://lists.pfsense.org/mailman/listinfo/list
Try setting a wireless client with a manual static IP address to verify if you can see the pfSense box and/or get outside... to eliminate it being just DHCP as the issue. _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
