>> Yes. We'd have thousands of people screaming if that wasn't the case, >> and I've never seen that not work. /etc/rc.newwanip runs when any IP >> changes, which does the update. It's not shown there in your log. When >> it runs it logs, not sure how much you snipped out. > > Since some of us have the problem, there's obviously something going on.
ISP had DHCP problems again yesterday and today, and yet again pfSense failed to update! Log from yesterday (System was rebooted the box to see if the problem was local): (Snipped a bunch of repeated or irrelevant lines) Oct 19 07:28:12 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Oct 19 07:28:12 dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory. Oct 19 07:28:12 dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such file or directory. Oct 19 07:28:12 check_reload_status: Updating all dyndns Oct 19 07:28:12 dnsmasq[41848]: started, version 2.55 cachesize 10000 Oct 19 07:28:12 dnsmasq[41848]: compile time options: IPv6 GNU-getopt no-DBus I18N DHCP TFTP Oct 19 07:28:12 dnsmasq[41848]: reading /etc/resolv.conf Oct 19 07:28:12 dnsmasq[41848]: using nameserver 8.8.4.4#53 Oct 19 07:28:12 dnsmasq[41848]: using nameserver 8.8.8.8#53 Oct 19 07:28:12 dnsmasq[41848]: using nameserver 8.8.4.4#53 Oct 19 07:28:12 dnsmasq[41848]: using nameserver 8.8.8.8#53 Oct 19 07:28:12 dnsmasq[41848]: ignoring nameserver 127.0.0.1 - local interface Oct 19 07:28:12 dnsmasq[41848]: ignoring nameserver 127.0.0.1 - local interface Oct 19 07:28:12 dnsmasq[41848]: read /etc/hosts - 17 addresses Oct 19 07:28:13 check_reload_status: Linkup starting em0 Oct 19 07:28:13 kernel: em0: link state changed to UP Oct 19 07:28:17 php: : DynDns: updatedns() starting Oct 19 07:28:17 php: : There was an error trying to determine the IP for interface - wan(em1_vlan1001). Probably interface has no ip or is down. Dyndns update not possible for dyndns. Oct 19 07:28:27 php: : OpenNTPD is starting up. Oct 19 07:28:29 check_reload_status: Restarting ipsec tunnels Oct 19 07:28:32 php: : Creating rrd update script Oct 19 07:28:32 kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0 Oct 19 07:28:32 kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1 Oct 19 07:28:32 kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2 Oct 19 07:28:32 kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3 Oct 19 07:28:33 php: : Restarting/Starting all packages. Oct 19 07:28:34 login: login on ttyv0 as root Oct 19 07:28:34 sshlockout[24879]: sshlockout/webConfigurator v3.0 starting up Oct 19 07:28:35 php: : IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing. Oct 19 07:28:37 check_reload_status: Reloading filter Oct 19 07:28:44 dnsmasq[41848]: read /etc/hosts - 23 addresses Oct 19 07:29:10 dhclient: FAIL Oct 19 07:29:34 php: /index.php: Successful webConfigurator login for user 'admin' from 10.10.10.10 Oct 19 07:29:34 php: /index.php: Successful webConfigurator login for user 'admin' from 10.10.10.10 Oct 19 07:30:12 dhclient: FAIL Oct 19 07:31:14 dhclient: FAIL Oct 19 07:55:52 dhclient: ARPSEND Oct 19 07:55:54 dhclient: ARPCHECK Oct 19 07:57:10 dhclient: FAIL Oct 19 07:58:12 dhclient: FAIL Oct 19 09:03:37 dhclient: ARPSEND Oct 19 09:03:39 dhclient: ARPCHECK Oct 19 09:03:39 dhclient: BOUND Oct 19 09:03:39 dhclient: Starting add_new_address() Oct 19 09:03:39 dhclient: ifconfig em1_vlan1001 inet <IP_OLD> netmask <MASK> broadcast <BROADCAST> Oct 19 09:03:39 dhclient: New IP Address (em1_vlan1001): <IP_OLD> Oct 19 09:03:39 dhclient: New Subnet Mask (em1_vlan1001): <MASK> Oct 19 09:03:39 dhclient: New Broadcast Address (em1_vlan1001): <BROADCAST> Oct 19 09:03:39 dhclient: New Routers (em1_vlan1001): <GW> Oct 19 09:03:39 dhclient: Adding new routes to interface: em1_vlan1001 Oct 19 09:03:39 dhclient: /sbin/route add default <GW> Oct 19 09:03:39 dhclient: Creating resolv.conf Oct 19 09:15:59 dnsmasq[41848]: read /etc/hosts - 21 addresses Oct 19 09:18:16 dnsmasq[41848]: read /etc/hosts - 21 addresses Oct 19 09:28:45 dnsmasq[41848]: read /etc/hosts - 20 addresses Oct 19 09:33:46 dhclient: RENEW Oct 19 10:03:53 dhclient: RENEW Notice DynDns did NOT run. Midnight rolls around, and NOW the script runs (from cron): Oct 20 00:39:17 dhclient: RENEW Oct 20 01:01:00 php: : DynDns: updatedns() starting Oct 20 01:01:00 php: : DynDns debug information: <IP_OLD> extracted from local system. Oct 20 01:01:00 php: : DynDns: Current WAN IP: <IP_OLD> Cached IP: <IP_OLD> Oct 20 01:01:00 php: : phpDynDNS: No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Oct 20 01:09:17 dhclient: RENEW Oct 20 14:39:21 dhclient: RENEW Oct 20 15:39:22 dhclient: EXPIRE Oct 20 15:39:22 dhclient: Deleting old routes Oct 20 15:39:22 dhclient: PREINIT Oct 20 15:40:23 dhclient: FAIL Oct 20 15:41:26 dhclient: FAIL Oct 20 15:42:27 dhclient: FAIL Oct 20 16:09:20 dhclient: FAIL Oct 20 16:09:22 dhclient: ARPSEND Oct 20 16:09:24 dhclient: ARPCHECK Oct 20 16:09:26 dhclient: BOUND Oct 20 16:09:26 dhclient: Starting add_new_address() Oct 20 16:09:26 dhclient: ifconfig em1_vlan1001 inet <IP_NEW> netmask <MASK> broadcast <BROADCAST> Oct 20 16:09:26 dhclient: New IP Address (em1_vlan1001): <IP_NEW> Oct 20 16:09:26 dhclient: New Subnet Mask (em1_vlan1001): <MASK> Oct 20 16:09:26 dhclient: New Broadcast Address (em1_vlan1001): <BROADCAST> Oct 20 16:09:26 dhclient: New Routers (em1_vlan1001): <GW> Oct 20 16:09:26 dhclient: Adding new routes to interface: em1_vlan1001 Oct 20 16:09:27 dhclient: /sbin/route add default <GW> Oct 20 16:09:27 dhclient: Creating resolv.conf Oct 20 16:39:26 dhclient: RENEW Manually restarted dyndns (edit rule, save ... no changes made): Oct 20 16:49:18 php: /index.php: Successful webConfigurator login for user 'admin' from 10.10.10.10 Oct 20 16:51:22 check_reload_status: Syncing firewall Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns: updatedns() starting Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns debug information: <IP_NEW> extracted from local system. Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns: Current WAN IP: <IP_NEW> Cached IP: <IP_OLD> Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns debug information: DynDns: cacheIP != wan_ip. Updating. Cached IP: <IP_OLD> WAN IP: <IP_NEW> Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns: DynDns _update() starting. Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns: DynDns _checkStatus() starting. Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns: Current Service: dyndns Oct 20 16:51:22 php: /services_dyndns_edit.php: DynDns debug information: <IP_NEW> extracted from local system. Oct 20 16:51:22 php: /services_dyndns_edit.php: phpDynDNS: updating cache file /conf/dyndns_wandyndns'uxorious.dyndns.org'.cache: <IP_NEW> Oct 20 16:51:22 php: /services_dyndns_edit.php: phpDynDNS: (Success) IP Address Changed Successfully! (<IP_NEW>) Something is going on! Regards, -Jeppe _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
