So there will be one DC on vlan 1, but it also needs to be reachable from vlan 2? If that's the case it should just be a matter of adding the appropriate rules to allow those ports to go from the vlan 1 to the vlan 2 interface. For dhcp you would probably need to set up a forwarder on the vlan 2 interface on pfsense to go to the DC. Alternatively you could allow the DC access to both vlans (either with two network cards or two addresses on a single card) I don't 100% remember if that works on 2012 (single card 2 vlans). On Jul 7, 2013 7:06 AM, "Cheyenne Deal" <[email protected]> wrote:
> I have been doing alot of research on this topic because at my shop and > the building I am in want me to manage their network and I am needing to > support a Windows 2012 Domain controller of my own and one for them on two > networks but on one WAN. I have seen DHCP and DNS configuration for Server > 2012 but not multiple and not over vlans that will not have any contact > with them. > Any help would be gladly appreciated. > > Thanks, > Cheyenne > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list > >
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
