Hello all… I’m trying to set up VLANs but I can’t get it to work.
I have a TP-Link TL-SL2210WEB switch connected to a pfSense box. The switch should connect to 3 ADSL Modems on ports 2, 3 and 4 and to the pfSense Box on port 1. On the switch I configured port 2 to be part of VLAN 2, port 3 to be part of VLAN 3 and port 4 to be part of VLAN 4. They all tag “Egress Frames” accordingly. Port 1 is member of all those VLANs and does not modify “Egress Frames”. On pfSense I tried to set up VLANs 2-4 too, but something doesn’t work. I created the VLANs during set up, then assigned them to the corresponding interface (fxp0 - I tried with re1 too) and then created OPT interfaces using the VLANs as their network ports. Then I gave each OPT an IP address according to the modem’s configuration (192.168.x.10). I tried creating Gatways when assigning IPs and as well afterwards but no interface gets online or can ping the modems. When I connect my laptop directly to port 1 of the switch and assign it an IP address corresponding to any of the modems connected I get online and can ping the modems too. What am I doing wrong? Thanks Ben (sorry for cross posting on forum and list, I’ll share any knowledge I can gather in bot too.) _______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
