Le 7 juil. 2014 à 09:48, Olivier Mascia <[email protected]> a écrit :

> I will assume your link is provided through VDSL2 as you mention Belgacom.

Possibly, I will have to check that. 

> The next WAN setup works fine with a fixed-IP circuit provided by EDPNET, who 
> uses Belgacom VDSL2 network.
> <PastedGraphic-1.png>

Ok. 

> Assign (for instance) one /64 out of the /56 they provide you to the LAN (I 
> understand you did that)

Yes I did that with little variations… I specified not a /64 but /56 which 
corresponds to the size of the attributed sub-network ! 
But I’ll try It with a /64 

I didn’t check the « Request IPv6 prefix » and « only request IPv6 prefix » and 
« Send IPv6 prefix »… so I’ll try It out with these hints. 


> 
> Regarding RA, I have to use these settings to best serve a LAN made of PCs 
> (mostly Windows, some Linux) and Macs.
> In this configuration, neither pfsense DHCPv4 server nor pfsense DHCPv6 
> server are used, those services are offered by other computers inside the LAN.
> I cut the print-screen before it, but don't forget to list your /64 LAN net 
> in the RA subnet(s) field (the third field).

Once again It was more or less set this way. 
I am not using Managed but Unmanaged which uses stateless autoconfig…  

And priority was set to « Normal ». 


I’ll give It a try and let you know how It went. 

> 
> <PastedGraphic-2.png>
> Hope it might help,
> __
> Olivier Mascia
> tipgroup.com/om
> 
>> Le 6 juil. 2014 à 23:32, [email protected] a écrit :
>> 
>> Hi, 
>> 
>> We are trying to debug an IPv6 link provided by Belgacom. 
>> 
>> 
>> We have our IPv6 through a PPPoE link, but instead of attributing our IPv6 
>> to the default interface (WAN), the fixed IPv6 seems to end up on the lo0 
>> interface ? 
>> 
>> I can ping6 google using the default route, but not through our LAN where I 
>> have configured one of the /64 block taken from the /56 provided by 
>> Belgacom. I have properly configured RA on the LAN with stateless 
>> autoconfig… still no luck ! 
>> 
>> 
>> Is there a bug somewhere or am I missing smthg ? 
>> 
>> 
>> Thanks. 
>> 
>> G.B. 
>> 
>> 
>> <Capture d’écran 2014-07-06 à 23.21.06.png>
>> 
>> ________________________________________________
>> «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
>> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
>> BSD - BSD - BSD - BSD - BSD - BSD - BSD - BSD -
>> ________________________________________________
>> «?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
>> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
>> PGP ID --> 0x1BA3C2FD
>> 
>> _______________________________________________
>> List mailing list
>> [email protected]
>> https://lists.pfsense.org/mailman/listinfo/list
> 
> _______________________________________________
> List mailing list
> [email protected]
> https://lists.pfsense.org/mailman/listinfo/list

________________________________________________
«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
BSD - BSD - BSD - BSD - BSD - BSD - BSD - BSD -
________________________________________________
«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
PGP ID --> 0x1BA3C2FD

_______________________________________________
List mailing list
[email protected]
https://lists.pfsense.org/mailman/listinfo/list

Reply via email to