Donot setup any gateway for LAN Outgoing connections Try to ping firewall , if u are not able to get internet access ; then enable outgoing connections for LAN Check in Status->DHCP Leases to know if ur traffic flows through firewall
On Thu, Sep 4, 2014 at 2:55 PM, Giles Coochey <[email protected]> wrote: > On 04/09/2014 09:58, Enock Halonda wrote: > > Hello All, > > Hope your all well. I need some assistance.I have setup my pfsense > system as below. > > WAN IP (IP from ISP) on Pfsense (10.20.5.1/24)---------- LOCAL LAN IP on > Pfsense (192.168.0.0/22) > > From the diagnosis on my Pfsense, i can ping from my WAN (10.20.5.2 as > source) to LAN Interface. > > I can not however ping any workstation on the local network for example: > 192.168.1.4. > > I can of course ping the IP: 192.168.1.4 from the LAN interface as the > source under my diagnosis. > > Internet Access is available. I just want to be able to get to the local > IP's on the LAN network from the WAN Interface. > > Has anyone faced this or can anyone advise. Thanks alot. > > > For starters, you would need a rule to allow inbound traffic from your > WAN to your LAN, pfsense by its nature, blocks inbound traffic on the WAN > interface. > Secondly, you will need to uncheck "Block private networks" on your WAN > interface. > Lastly, I'm assuming that you have disabled NAT already, and that your ISP > is doing NAT for both your LAN and WAN subnets. > > -- > Regards, > > Giles Coochey, CCNP, CCNA, CCNAS > NetSecSpec Ltd > +44 (0) 8444 780677 > +44 (0) 7584 > 634135http://www.coochey.nethttp://[email protected] > > > _______________________________________________ > List mailing list > [email protected] > https://lists.pfsense.org/mailman/listinfo/list >
_______________________________________________ List mailing list [email protected] https://lists.pfsense.org/mailman/listinfo/list
