I have had a devil of a time getting the 2.1.5 memstick (only one I've
tried) to install on my new APU1D4.
I have all the bits and pieces needed to get it going but I'm trying to
install with both a 128GB SSD (which the BIOS is recognizing) and a 64GB
Class 4 SDXC (also recognized)...
I made the bootable USB on my Mac via the commands here:
https://cunninghamshane.com/make-a-bootable-usb-drive-from-img-in-mac-os-x/
but I had to make a few changes (note for those looking to do this...
I've never seen a Mac whose drives are /dev/r-anything...)
But I seem to get nowhere... it starts to boot, sometimes I can get it
to go into the BSD loader if I tell it to do PXE boot but then it hangs.
I thought it might be a console redirection issue so I disconnected and
reconnected at 9600bps and I get gibberish.
The SSD came out of a functioning Windows machine well over a year ago,
I suspect that might be the issue but I would love confirmation first.
Also if someone has a lead on a memory stick Linux I can run as a
console redirect so I can destroy that partition that would be helpful, too.
Thanks,
Ryan
_______________________________________________
List mailing list
[email protected]
https://lists.pfsense.org/mailman/listinfo/list
