WKS 10.0.0.11
Softphone |
WKS 192.168.1.137
|
|
|
|
|
10.0.0.5|PFsense|192.168.1.208 |
VoIP Phone-|SWITCH|-----------| |---------------|SWITCH|--VoIP
Phone
cisco 7962 WAN | |LAN
| cisco 7970
10.0.0.10
| 192.168.1.105
|
|
Asterisk Server
192.168.1.202
I can get the soft phone on the workstation to work through the firewall to
register to the asterisk server and make call to the LAN phone but cannot
get the cisco phone to work to do the same. I have tried also turning on
SIProxd and nothing changes. Any help would be much appreciated
Here are my rules
WAN
ID Proto Source Port
Destination Port Gateway Queue Schedule
Description
IPv4 UDP WAN address 10000 - 20000
192.168.1.202 10000 - 20000 * none
NAT Forward RTP wan traffic
IPv4 UDP WAN address 5000 - 5100
192.168.1.202 5060 (SIP) * none
LAN
ID Proto Source Port Destination Port
Gateway Queue Schedule Description
* * * LAN Address 80
* *
Anti-Lockout Rule
IPv4 * LAN net *
* * * none
Default LAN -> any
NAT
If Proto Src. addr Src. ports Dest.
addr Dest. ports NAT IP NAT Ports Description
WAN TCP/UDP * * * 5060 - 5080
192.168.1.202 5060 - 5080 Forward SIP wan traffic
WAN TCP/UDP *
* * 10000 - 20000
192.168.1.202 10000 - 20000 Forward RTP wan traffic
OUTBOUND
Interface Source Source Port Destination
Destination Port NAT Address NAT Port Static
Port Description
WAN 192.168.1.0/24 * *
* WAN address *
NO Auto created rule for LAN
ON= Manual Outbound NAT rule generation (AON - Advanced Outbound NAT)
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
