2015-01-29 18:29 GMT-03:00 Vinícius Zavam <[email protected]>: > > > 2015-01-29 10:56 GMT-03:00 Vinícius Zavam <[email protected]>: > > >> >> 2015-01-29 10:24 GMT-03:00 Vinícius Zavam <[email protected]>: >> >> >>> >>> 2015-01-28 6:41 GMT-03:00 WolfSec-Support <[email protected]>: >>> >>>> >>>> 2015-01-27 22:13 GMT+01:00 Chris Buechler <[email protected]>: >>>> >>>>> > we have general problems with v2.2 >>>>> > >>>>> > I tried to update 13 devices, and only some worked fine (1 ALIX), >>>>> > and one virtual machine (afterwards crashes see below) >>>>> > >>>>> > Most we had problems, e.g: >>>>> > - looping packet installations without ending - reboot is not >>>>> solving it >>>>> >>>>> In what circumstance? >>>>> >>>> >>>> after launching the amd64 based pfsense to make an upgrade from 2.1.5 >>>> to v.2.2 via webgui, >>>> it installs the upgrade, and then reinstalls all packages >>>> >>>> this never ends >>>> >>>> also a reboot will not solve this / brake package installation loop >>>> >>> >>> +1 >>> >>> same thing is happening in here. (didn't reboot) >>> from 2.1.5 to 2.2; amd64 too. uptime after upgrade? 17 Hours 56 Minutes >>> 34 Seconds... >>> >>> > Intel X5550 Issue under VMware ESXi 5.1 >>>>> > >>>>> > - crashes on ALL machines which run under VMware ESXi 5.1 on CPU: >>>>> >>>>> There has to be some difference between this and the other outside of >>>>> the CPU. Some configuration difference, or something. What are you >>>>> using on these that you aren't on the others? >>>>> >>>> >>>> all use same packages and same plattform, and same sevices: >>>> >>>> packages: >>>> - squid >>>> - lightsquid >>>> - open-vm-tools >>>> - cron >>>> - autoconfigbackup >>>> >>> >>> nmap, mtr-nox11, sudo, suricata >>> >>> >>>> other vm's with only: >>>> packages: >>>> - open-vm-tools >>>> - cron >>>> - autoconfigbackup >>>> >>>> have same issue >>>> >>>> I tested also on different hosts (3x same HP DL 380 G6 with same CPU's) >>>> >>> >>> just one; physical machine... >>> >>> same issue >>>> >>>> also I thried without any package: >>>> - crashes >>>> >>>> services used: >>>> - DNS Forwarder >>>> - OpenVPN >>>> - Firewall for sure ;) >>>> - HA >>>> - Limiters >>>> >>> >>> firewall [LOL], dhcpv4 (+nat, +vlan), dhcpv6 (+vlan), radvd, >>> openvpn, dns forwarder. >>> >>> all worked fine under v2.1.5 >>>> >>>> >>>> >>>>> >>>>> The only crashing scenario I've found in release is limiters+HA as >>>>> noted in the upgrade guide. >>>>> https://doc.pfsense.org/index.php/Upgrade_Guide >>>>> >>>> >>>> >>>> uh, may have ignored that fact - yes - limiters & HA >>>> >>>> well, question: >>>> - disabling the limiters would solve this issue in meantime ? >>>> - or do I have to delete all limiters >>>> >>>> but: >>>> on other CPU under VMware ESX5.1 I have release 2.2 WITH HA AND >>>> limiters up and running without problems.... >>>> >>>> strange.... >>>> >>>> so, would help If you anser upper questions - I will do some test here >>>> >>>> Many thanks for the helpinng hint >>>> >>>> Best regards >>>> Stephan >>>> >>> >>> system logs? http://pastebin.com/8ni6F2Tb >>> >>> PS: suricata is *NOT* working :) >>> >>> >>> -- >>> Vinícius Zavam >>> >> >> almost forgot to mention! SSH (with rsa keys) is working, but... >> >> vinicius.zavam@egypcio:~ % ssh -6 -l noc -p 22085 2001:aaaa:bbbb:cccc:: >> Last login: Wed Jan 28 16:26:47 2015 from 2001:aaaa:bbbb:cccc::fb5d >> export: Command not found. >> [2.2-RELEASE][[email protected]]/home/noc(1) id >> uid=2000(noc) gid=65534(nobody) groups=65534(nobody),1999(admins) >> [2.2-RELEASE][[email protected]]/home/noc(2) su - >> su: Sorry >> [2.2-RELEASE][[email protected]]/home/noc(3) sudo su - >> Shared object "libutil.so.8" not found, required by "sudo" >> [2.2-RELEASE][[email protected]]/home/noc(4) pkg info >> The package management tool is not yet installed on your system. >> Do you want to fetch and install it now? [y/N]: >> [2.2-RELEASE][[email protected]]/home/noc(5) ls -1 /var/db/pkg >> bsdinstaller-2.0.2012.1207 >> gettext-0.18.1.1 >> iperf-2.0.5 # shouldn't be here, I think; I've deinstalled it long time >> ago. >> libiconv-1.14 >> libpcap-1.2.1 >> lua-5.1.5_4 >> mtr-nox11-0.82 >> nmap-6.01 >> openssl-1.0.1_10 >> pcre-8.30_2 >> pkg-config-0.25_1 >> [2.2-RELEASE][[email protected]]/home/noc(6) nmap --version >> >> Nmap version 6.47 ( http://nmap.org ) >> Platform: amd64-portbld-freebsd10.0 >> Compiled with: liblua-5.2.3 openssl-1.0.1g-freebsd libpcre-8.35 >> libpcap-1.4.0 nmap-libdnet-1.12 ipv6 >> Compiled without: >> Available nsock engines: kqueue poll select >> [2.2-RELEASE][[email protected]]/home/noc(7) mtr --version >> mtr 0.85 >> [2.2-RELEASE][[email protected]]/home/noc(8) iperf >> iperf: Command not found. >> [2.2-RELEASE][[email protected]]/home/noc(9) whereis iperf >> whereis: Command not found. >> >> PS: a quick test scan with nmap was okay. mtr-nox11 is also in good shape. >> >> >> -- >> Vinícius Zavam >> > > https://redmine.pfsense.org/issues/4344 > > > -- > Vinícius Zavam >
solved? https://redmine.pfsense.org/issues/4344#note-3 (it worked here). thanks to PiBa-NL, ##pfsense@freenode. it smells like... packages issues, I think. -- Vinícius Zavam profiles.google.com/egypcio
_______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
