1.  Another thing to compare the version of your dir and fd to see if they
are close enough. old fd and new dir do not mix. old dir and new fd are ok
unless they versions are too far apart.

2.  The  /usr/pbi/bacula-i386/local/etc/bacula/bacula-fd.conf  - check to
see if the name password matches with dir.

3.  In the pf console, type bconsole and see if it connects with the dir.
If not, check it's conf
file: /usr/pbi/bacula-i386/local/etc/bacula/bconsole.conf

4.  I COULD see bacula-fd in "top" when I first started it. Now I cannot -
that's good news because I can find the fault for you. You will have to
wait till tomorrow.

Yudhvir


On Sun, Feb 8, 2015 at 11:15 AM, [email protected] <[email protected]>
wrote:

>  i'd use "find" and there is also a pseudo config file in a bin directory
> which points to the actual fd executable that t find. You can edit the top
> section of that to reflect your install.
>
>
> I'll take a look on my system and get back to you.
>
>
> Yudhvir ਯੁਧੱਵੀਰ
>
> 408 915 9709 <408%C2%A0915%C2%A09709>
>
> ------ Original message------
>
> *From: *J. Echter
>
> *Date: *Sun, Feb 8, 2015 10:17 AM
>
> *To: *[email protected];
>
> *Subject:*Re: [pfSense] bacula-client 7.0.5 on pfsense 2.2
> Yes it was working on the old pfsense, i checked the config and it still
> shows the same contents.
>
> How do i check for a double install?
>
> i already removed and reinstalled the package.
>
> thanks
>
> Am 08.02.2015 um 18:39 schrieb [email protected]:
>
>  You don't mention if you had fd working on the earlier version of pf.
>
>
>  You must have checked the config file for password and dir settings. The
> upgrade might have changed it because this might be a fresh install of fd.
>
>
>  You say it is not listening, that sounds like there is an attempt at a
> new install. Check for multiple installs.
>
>
>
>  Yudhvir ਯੁਧੱਵੀਰ
>
> 408 915 9709 <408%C2%A0915%C2%A09709>
>
> ------ Original message------
>
> *From: *J. Echter
>
> *Date: *Sun, Feb 8, 2015 4:56 AM
>
> *To: *pfSense support and discussion;
>
> *Subject:*[pfSense] bacula-client 7.0.5 on pfsense 2.2
>
> Hi,i'm fiddling with bacula-client on upgraded pfsense 2.2.i don't see any 
> error in the logs, i don't see any error with bacula-fd-f (run in foreground) 
> -d 10 (debug level 10)i even don't see it spitting out errors as the config 
> file isn't existant[2.2-RELEASE][[email protected]]/conf: 
> ls/usr/local/etc/bacula/bacula-fd.confls: 
> /usr/local/etc/bacula/bacula-fd.conf: No such file or 
> directory[2.2-RELEASE][[email protected]]/conf: ps aux | grep 
> bacularoot    59559   0.0  0.2  56420  7364  -  Ss    1:50PM     
> 0:00.00/usr/local/sbin/bacula-fd -u root -g wheel -v 
> -c/usr/local/etc/bacula/bacula-fd.confroot    99408   0.0  0.1  18884  2384  
> 0  S+    1:50PM     0:00.00 grepbaculanetstat doesn't show it listening 
> too:Active Internet connectionsProto Recv-Q Send-Q Local Address          
> Foreign Address        (state)tcp4       0      0 pfsense.https          
> 10.0.1.14.38261        TIME_WAITtcp4       0      0 pfsense.38791          
> 10.0.1.14.40513       ESTABLISHEDtcp6       0      0 localhost.3493         
> localhost.56539       ESTABLISHEDtcp6       0      0 localhost.56539        
> localhost.3493        ESTABLISHEDudp4       0      0 192.168.100.1.ntp      
> *.*                   udp6       0      0 fe80::21b:21ff:f.ntp   *. *         
>           udp4       0      0 192.168.4.1.ntp        *.*                   
> udp6       0      0 fe80::21b:21ff:f.ntp   *.*                   udp4       0 
>      0 192.168.1.1.ntp        *.*                   udp6       0      0 
> fe80::21b:21ff:f.ntp   *.*                   udp4       0      0 
> 192.168.3.1.ntp        *.*                   udp6       0      0 
> fe80::21b:21ff:f.ntp   *.*                   udp4       0      0 pfsense.ntp  
>           *.*                   udp6       0      0 fe80::21b:21ff:f.ntp   
> *.*                   udp6       0      0 localhost.ntp          *.*          
>          udp4       0      0 localhost.ntp          *.*                   
> udp6       0      0 fe80::d227:88ff:.ntp   *.*                   udp4       0 
>      0 192.168.2.1.ntp         *.*                   udp4       0      0 
> host-62-245-238-.1194  *.*                   udp4       0      0 
> localhost.tftp         *.*                   udp4       0      0 
> localhost.tftp-proxy   *.*                   icm4       0      0 
> host-62-245-238-.*     *.*            any hints to solve 
> this?thanks!!_______________________________________________pfSense mailing 
> listhttps://lists.pfsense.org/mailman/listinfo/listSupport the project with 
> Gold! https://pfsense.org/gold
>
>
>
> _______________________________________________pfSense mailing 
> listhttps://lists.pfsense.org/mailman/listinfo/listSupport the project with 
> Gold! https://pfsense.org/gold
>
>
>
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold

Reply via email to