Is your skew set to 0 on your primary router’s CARP interfaces?

        ED.

> On 2015, Mar 23, at 3:50 PM, Steve Yates <[email protected]> wrote:
> 
> Just ran into an odd scenario in my testbed...if pfSense (router1) is in a VM 
> (Parallels Cloud/Virtuozzo), and I run "service network restart" on the host 
> for that VM, pfSense fails over the WAN interface but does not fail over the 
> LAN interface.  At that point external communication is lost because one 
> router is handling LAN and one WAN.  It does not seem to recover afterwards 
> until the host is restarted (we're also using VLANs on the host level for the 
> pfSense VM to use for its interfaces, so that may be a factor in having the 
> host restart).
> 
> Per http://www.freebsd.org/cgi/man.cgi?query=carp&sektion=4, if 
> net.inet.carp.preempt=1 then the CARP interfaces should fail over together.  
> Running "sysctl net.inet.carp" on pfSense shows net.inet.carp.preempt=1.  If 
> I reload the CARP status page on router2 quickly, I can see that the WAN and 
> LAN interfaces correctly fail over so router2 is Master, however it almost 
> immediately reverts so router2 is Master for WAN but router2 is Backup for 
> LAN, and router1 is Master for LAN.
> 
> How can I ensure they "fail back" together?
> 
> Note that when I simply boot the host for router1, pfSense does fail over and 
> back correctly!  So something is making it not fail back on the network 
> restart?
> 
> For what it's worth we have a IPv4 and IPv6 CARP IPs for WAN, and an IPv4, an 
> IPv4 alias, and IPv6 CARP IP for LAN.
> 
> I found an OpenBSD (which I know is different OS, but...) FAQ page on CARP 
> that says "By default all carp(4) interfaces are added to the carp group."  
> However if I run "ifconfig -v" on pfSense no groups are listed for em0 and 
> em1, only lo0, enc0, and ovpns1.  I created a pfSense interface group 
> "carpgroup" for LAN and WAN, but had the same symptoms.
> 
> Thanks,
> --
> 
> Steve Yates
> ITS, Inc.
> 
> _______________________________________________
> pfSense mailing list
> https://lists.pfsense.org/mailman/listinfo/list
> Support the project with Gold! https://pfsense.org/gold

_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold

Reply via email to