My first instinct is to look at PVST+ interoperability issues because of the multi-vendor network, but we need a LOT more detail on the network topology to even make intelligent guesses.
You've essentially said "I've got this car, with four Goodyear tires, and my trailer makes a funny noise. FYI, my other car works fine. What's wrong?" Start anyway by looking on the Cisco switches for spanning tree ports in ErrDisable state. Read the switch logs, look for flapping or inconsistent ports. Also, cross-posting is considered rude. At least provide a link to the related discussion on the forum! -Adam On July 9, 2015 2:55:59 PM CDT, Tom Ryan <[email protected]> wrote: >all, > >I posted this to the forums but haven't been able to resolve it yet. > >Our setup is multiple cisco switches trunked together and a juniper >"router". > >We have private and public vlans and a pfsense box bridging the two >together in a transparent filtering bridge mode. > >If a device is connected to a private vlan on the same switch that the >pfsense box is, everything works ok. If it is on another switch, it can >communicate with the pfsense box and other devices on any switch on the >private vlan but not pass the gateway (i.e. move it from private vlan x >on >switch 1 (where it works) to private vlan x on switch 2 and it fails.) > >This setup worked fine when the router was a cisco model. > >It also works fine for the private vlan that is currently protected by >a >sonicwall in transparent mode. > >Any ideas? > >Thanks >_______________________________________________ >pfSense mailing list >https://lists.pfsense.org/mailman/listinfo/list >Support the project with Gold! https://pfsense.org/gold -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
