I'm a bit confused whether the /25 is your LAN subnet or another interface. The OpenVPN tunnel network has to be a subnet that is on no other interfaces including the remote PC's LAN. For example we have our data center using a /29 for WAN, a /25 for LAN, 10.20.1.0/24 for PFSYNC, and 192.168.199.0/24 for OpenVPN. 192.168.199.0/24 is just used to route packets from the remote PC to behind the router.
You wrote "/130" for the CARP WAN alias...I'm assuming that's a typo and should be "/29" like the others. -- Steve Yates ITS, Inc. -----Original Message----- From: List [mailto:[email protected]] On Behalf Of Daniel Eschner Sent: Tuesday, May 10, 2016 2:32 PM To: [email protected] Subject: [pfSense] Routing Issue Hi there, i try to configure 2 PFsense Firewalls as the Following Setup: My ISP gave me a /29 ans Transfer-Network. I Setup the IPS as the following: x.x.x.131/29 PF1 x.x.x.132/29 PF2 x.x.x.130/130 CARP Interface (Redundant) After that i added x.x.x.2/25 and to another interface and created also a CARP Interface with IP 1 (default gateway for Clients) Now i want to route the /25 thought the .130 IP for example that openvpn have the IP from the /25 network. When i establish a BPN Connection it shows me always the IP .131 Can it be changed for example change Outbound NAT or so that the .1 is shown in the Interface? All IPs are Public IPs Hope you understand what i mean ;) Cheers Daniel _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
