I have the limiters configured as you show. But are you saying you would normally set your limiter on rules on both the LAN and WAN? Basically, I should set it on LAN for now and when the bug is fixed set it on WAN also?
-- Steve Yates ITS, Inc. -----Original Message----- From: List [mailto:[email protected]] On Behalf Of WebDawg Sent: Thursday, May 12, 2016 12:47 PM To: pfSense Support and Discussion Mailing List <[email protected]> Subject: Re: [pfSense] Limiters on LAN, WAN On Thu, May 12, 2016 at 11:52 AM, Steve Yates <[email protected]> wrote: > A question on where to set up a limiter...if it is set on a LAN rule > and has in/out limiters set, will the limiter only apply to outbound traffic > matching the rule (from __ to any)? Or would that match, say, the response > to an outbound HTTP request? Up until now I've only had occasion to use a > limiter on a LAN upload. > > I did see the known issue that limiters don't currently work on > NATted interfaces so don't have them set up on the WAN side. > > Thanks, > > Steve Yates > ITS, Inc. > > _______________________________________________ Normal firewall rules are only ingress, they can check source and dest from a packing coming in to the interface. I limit both upload and download of clients. Limiters: UPLOAD: Some Limit Set Mask: Source Address Bits: 32 and 128 DOWNLOAD: Some Limit Set Mask: Destination Address Bits: 32 and 128 pfsense firewall rule: Pass some source address Advanced Settings: In / Out pipe: UPLOAD FIRST DOWNLOAD SECOND It it would take matched traffic from a firewall rule and put it in the limiter. I have not tried using egress rules but with the any directive all traffic to and from the system gets limited. _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
