On Fri, 29 Jul 2016 23:19:45 -0500 Jim Thompson <[email protected]> wrote:
> pfSense is normally tested on the devices that Netgate has released as > products over the past two years. > > pfSense 2.3.2 was tested on the following devices and hypervisors: > > SG-2220 (eMMC and M.2), SG-2440 (eMMC and mSATA), SG-4860 (eMMC and mSATA), > SG-8860 (eMMC and mSATA), 7541 (CF and SSD), 7551 (CF and SSD), APU (not > APU2) (nano on SD, full install on SD, and mSATA), ALIX, C2758, XG-1540, > XG2758, AWS, Azure, OVA (VMware), as well as a KVM and bhyve images for > internal use. > > pfSense CE is tested against an otherwise unremarkable, ordinary 64-bit PC > for the ISO, memstick and serial memstick images for both amd64 and i386 > architectures, including a "CE" install for the ADI (SG-xxxx) platforms > above. NanoBSD images are tested for both 2G and 4G CF cards for both > amd64 and i386 for both VGA and non-VGA. An amd64 OVA for pfSense CE is > produced and tested as well. > > For all the above, clean install as well as upgrade (from 2.3.1 and 2.2.6 ) > were tested. Several parameters and items (I will not document them all) > are checked after install or upgrade to ensure they are the expected value. > > The full matrix takes several people several days to complete. > > As a reminder, pfSense 2.4 will not support i386, and will not support the > 'nano' image. > We are including ARM support (for the uFW) in pfSense 2.4. > > Jim I wonder if this was solved: http://marc.info/?l=soekris-tech&m=134826496814105&w=4 To refresh, net6501-70 would not run pfsense amd64 would need a special kernel options that was not there. If this is not solved, no net6501 support on 2.4 ownwards. thanks, matheus -- "We will call you Cygnus, the God of balance you shall be." _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
