How about using vlan tagging? Eero
2017-03-29 13:55 GMT+03:00 Claudio M. <pfse...@cmaffio.it>: > Hi > I've migrated a linux firewall to a 2.3.3-RELEASE-p1 pfsense. > The old configuration was with 2 interfaces connected to adsl routers and > an > interface for the lan. Was configurated also a GRE VPN with an alias IP on > this > LAN network so on the same LAN coexisted two networks > 192.168.1.0/24 > 10.7.13.0/24 > where the first was for all desktop clients and the seconds for the > servers. A > server have a interface on the LAN with Ip 10.7.13.1 and a alias on the > same > interface with 192.168.1.6. > When a client is connect to this server, sends packets to the firewall and > the > firewall resends that to the destination server. The server receive this > packets and reply using the same interface but contact directly the client > with IP on the same net. Before with linux this was not a problem but with > pfsense, a statefull firewall, this is not more possible. Now i've an > asymmetric routing without a routing so I cannot use the tips present at > this > page https://doc.pfsense.org/index.php/Asymmetric_Routing_and_ > Firewall_Rules > > How can I to do? > > Best regards > Claudio M. > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold > _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold