On the interface(s) is "Block private networks" checked? --
Steve Yates ITS, Inc. -----Original Message----- From: List [mailto:[email protected]] On Behalf Of WolfSec-Support Sent: Thursday, August 17, 2017 3:31 AM To: pfSense Support and Discussion Mailing List <[email protected]> Subject: Re: [pfSense] Routing Vlan Hi, - does the Testclient .50.20 has as Standard gateway the .50.1 ? - does the L3 switch know in routing table that the 192.168.0.0/24 network is behind .50.2 - check pfsense NAT setup - may NAT on pfsense causes this ? try to disable nat here for a test - also check routes on pfsense BR Stephan 2017-08-17 0:00 GMT+02:00 Getzan Avila <[email protected]>: > Hi List, > > I will appreciate all your help. > > I'm setting up a VLAN Scenario with a L3 Switch, create a VLAN50 (Voice) > with IP 192.168.50.1 in the switch. The PFsense LAN is the 192.168.0.1 and > the PFSense VLAN50 IP is 192.168.50.2, I can ping que host in the VLAN50 > and viceversa. But when a tried to access the Server in the LAN IP > 192.168.0.201. received this error > > VLAN50 udp 192.168.50.20:9301 -> 192.168.0.201:9300 NO_TRAFFIC:SINGLE > 1.207 > K / 0 165 KiB / 0 B > > I setup in the firewall i the LAN interface,accept all IPV4 traffic for the > VLAN50 and the same for VLAN50 to LAN. > > > Thks in advance. > > regards > > Getzan > _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
