Hello, list!
I'm using pfSense 2.3.4 on a ADSL line, i.e., my WAN interface connects using
PPPoE. My provider cannot/do not yet offer me native IPv6, but use a 6in4
tunnel. The tunnel is using a GIF in pfSense. This setup works fine.
For VoIP, I now need to implement traffic shaping - and I am unsure how to
implement this with the tunnel. All IPv4 traffic goes via the WAN interface,
so the rules created by the traffic shaping wizard (multiple lan/wan) are
triggered. However, all IPv6 traffic goes via the tunnel and, therefore, in
the and via the WAN interface, too. So I cannot treat the tunnel and the WAN
interface as dedicated links.
The queues are attached to the WAN interface. I assume that this is wrong for
the setup - at least it shows no effect during my tests. I would guess that
I'd need a "pseudo interface" over which all outgoing traffic is routed before
it reaches the GIF/WAN interface. Is that correct? If so, how can I achieve
this?
I have googled extensively and could not find an answer. I hope that this
hasn't been resolved in a different thread I could not find before; if so, I
apologize in advance and would be happy for a link.
Thanks in advance for any hint!
--- Eric
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
