Finally got it working on WAN side of firewall, by just enabling this
checkbox:

Request a IPv6 prefix/information through the IPv4 connectivity link

Still need some work on lan side, because I am a bit lost with it.

--
Eero

2017-11-21 20:46 GMT+02:00 Steve Yates <[email protected]>:

> Ah yes, System/Advanced/Networking, Allow IPv6.
>
> --
>
> Steve Yates
> ITS, Inc.
>
> -----Original Message-----
> From: List [mailto:[email protected]] On Behalf Of Daniel
> Sent: Tuesday, November 21, 2017 12:42 PM
> To: pfSense Support and Discussion Mailing List <[email protected]>
> Subject: Re: [pfSense] pfsense ipv6 not working
>
> You also need to enbale it in the Setting.. tick te IPv6 Box.
>
> Am 21.11.17, 19:38 schrieb "List im Auftrag von Steve Yates" <
> [email protected] im Auftrag von [email protected]>:
>
>     Starting at the top level, do you have a firewall rule allowing ICMP
> for IPv6?
>
>     --
>
>     Steve Yates
>     ITS, Inc.
>
>     -----Original Message-----
>     From: List [mailto:[email protected]] On Behalf Of Eero
> Volotinen
>     Sent: Monday, November 20, 2017 1:01 PM
>     To: pfSense Support and Discussion Mailing List <
> [email protected]>
>     Subject: [pfSense] pfsense ipv6 not working
>
>     Hi List,
>
>     Running ipv6 with dhcpv6 from isp and it works on my laptop without
> pfsense,
>     but on pfsense shell, I cannot even ping other network addresses that
> gw:
>
>     ping6 fe80::208:20ff:fe4e:1c1b
>
>     PING6(56=40+8+8 bytes) fe80::ae1f:6bff:fe43:a993%igb3 -->
>     fe80::208:20ff:fe4e:1c1b
>
>     16 bytes from fe80::208:20ff:fe4e:1c1b%igb3, icmp_seq=0 hlim=64
> time=0.573
>     ms
>
>     16 bytes from fe80::208:20ff:fe4e:1c1b%igb3, icmp_seq=2 hlim=64
> time=0.578
>     ms
>
>     16 bytes from fe80::208:20ff:fe4e:1c1b%igb3, icmp_seq=3 hlim=64
> time=0.518
>     ms
>
>
>     and when trying to ping google:
>
>
>
>     ping6 2a00:1450:4001:820::200e
>
>     PING6(56=40+8+8 bytes) fe80::ae1f:6bff:fe43:a993%igb3 -->
>     2a00:1450:4001:820::200e
>
>     ^C
>
>     --- 2a00:1450:4001:820::200e ping6 statistics ---
>
>     7 packets transmitted, 0 packets received, 100.0% packet loss
>
>     Wan configuration is using DHCPv6
>
> _______________________________________________
> pfSense mailing list
> https://lists.pfsense.org/mailman/listinfo/list
> Support the project with Gold! https://pfsense.org/gold
>
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold

Reply via email to