|
Just plugged my pro-solo into my
303. Have it working fine so... Here's how to get it to work (hopefully) Firstly, make sure you have the right lead (Kenton can
supply one or you will have to make one yourself) Secondly turn it on whilst
holding the INC button (this puts it into Sync mode) The
settings on the pro-solo should be K - clock divide = 2 L - Positive N - On Make sure your sequencer is sending timecode
and hit play. If it doesn't work, wiggle the din plug in the 303. If it
still doesn't work switch the cv-gate plugs around on
the Pro-solo (my cable has no marking so its easy to
plug the wrong one in). The Pro-solo also has a midi monitoring mode. This might be
helpful if you want to make sure that your sequencer is transmitting the right
stuff. Hope this helps Cheers Ian |
