So i should stick with the reality 50ish clients - per ap? it will more than likely be open as its for a venue, so it will only be used during shows.
Date: Mon, 14 Sep 2015 15:15:17 -0700 Subject: Re: [NTSysADM] Ubiquity coverage From: [email protected] To: [email protected] That concurrent client spec is likely assuming it's an open network with no authentication, encryption, vlan tagging, or filtering of any kind (just like every other vendor's claim of concurrent clients at 500+ [looking at you Ruckus]). Nathan Shelby Director of Systems Engineering – Quote Wizard [email protected] / 206-753-2626 Malo Periculosam Libertatem Quam Quietum Servitium On Mon, Sep 14, 2015 at 2:30 PM, J- P <[email protected]> wrote: So here is the model they purchased https://store.ubnt.com/unifi/unifi-ap-pro.html I'm finding it VERY HARD to swallow this spec; Concurrent Clients 200+ And there is no support number on their website only KB's , Video's , forums etc.. How can something be classified as "Enterprise" without any real support options? From: [email protected] To: [email protected] Subject: [NTSysADM] Ubiquity coverage Date: Mon, 14 Sep 2015 16:56:54 -0400 Hi all, This is a preliminary question as I'm waiting for more feedback from the client- a client is having a an event with 500 guests, single floor no obstruction 150x60 (9000 sq ft) They purchased 3 "ubiquity pro" AP's (I've mainly worked with Aerohive and lately Meraki) With the Hives each radio was good for 60 clients give or take, does anyone know what a Ubiquity pro 3x3 MIMO is rated for? My initial thought was "they are nuts if they think 3 AP's will cover 500 guests" but again, I have no exp with these, I know a few people on here have used them. And yes they have enough bandwidth (100x100 pipe) Thx
