Hi, Yes, that is my co-worker in the project we are working on now.. we have done a lot of testing… we tested the below scenario on a Hyper-V after reading about the other issue in the ADK with “fast disks”
We use a .NET framework application and a Powershell menu in the deployments at this customer. Sent the feedback to Aaron and on Connect as well. Jörgen Nilsson From: [email protected] [mailto:[email protected]] On Behalf Of Niall Brady Sent: den 17 september 2015 19:47 To: [email protected] Subject: Re: [mssms] RE: Powershell on WinPE10 (UEFI) I've seen people talking about it on windows-noob, here's an interesting quote, i can't see any way to limit the cpu via the options in the surface pro 3 however, "so far that's been the case... However, by limiting the available Resources (CPU), as described above, it works in most cases - that behaviour is binary... 2 CPU == 100 % failure, 1 CPU == 80 % Success.... " http://www.windows-noob.com/forums/topic/12833-sccm-2012-r2-sp1-task-sequence-powershell-adk-10-error-800703e9/page-2 On Thu, Sep 17, 2015 at 7:24 PM, Michael Niehaus <[email protected] <mailto:[email protected]> > wrote: We’ve been investigating, but so far there’s no concrete information on the cause (other than it’s only on x64). Thanks, -Michael From: [email protected] <mailto:[email protected]> [mailto:[email protected] <mailto:[email protected]> ] On Behalf Of Jerousek, Jeff Sent: Thursday, September 17, 2015 10:08 AM To: [email protected] <mailto:[email protected]> Subject: [mssms] Powershell on WinPE10 (UEFI) Has anyone narrowed down or fixed what’s causing errors with PowerShell on certain devices in PE 10? I’ve only seen the errors on UEFI devices. So far Surface Pro 3s and Lenovo T440s are failing to even run PowerShell from the command line sometimes. I’ve gotten memory exception errors and a mscorelib error. Turning Legacy mode on for the T440s fixed the problem. Haven’t found a fix for the SP3. Hyper-V Gen 2, Dell 9010, 9020s all work fine. Thanks, Jeff Jerousek
