Yep I see it and I can populate the fields for the static IP, but when I apply I get this error. I have the latest update of MDT 2012 as well.
Static IP not set in Network Adapter Configuration Wizard When initializing a deployment in Windows PE and clicking Configure Static IP Address , if you uncheck Enable DHCP and enter static IP information, the following Network Settings Error will display: WMI Function: Adapter.EnableStatic(IPAddress,SubnetMask) FAILURE: -2147467259 This warning may also be seen in the results screen and log files during a deployment. Workaround : a static IP can be manually set from Windows PE using netsh, but otherwise there are no workarounds at this time. Dan Franciscus Systems Administrator Information Technology Group Institute for Advanced Study 609-734-8138 From: "Joe Sestrich" <[email protected]> To: [email protected] Sent: Tuesday, January 12, 2016 6:10:32 PM Subject: RE: [MDT-OSD] RE: MDT Litetouch offline media If you have the Welcome screen enabled, you should be able to apply a static IP there, no? You may have issues with domain lookup suffixes depending on how you apply those. From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Franciscus Sent: Tuesday, January 12, 2016 3:05 PM To: [email protected] Subject: Re: [MDT-OSD] RE: MDT Litetouch offline media So it turns out I forgot we do not enable DHCP on our server VLAN, and the static IP setup is throwing me a known error. I know I could use netsh but I would like a more automated way to do this. Dan Franciscus Systems Administrator Information Technology Group Institute for Advanced Study 609-734-8138 From: "Keith Garner (Hotmail)" < [email protected] > To: [email protected] Sent: Monday, January 11, 2016 1:35:38 PM Subject: RE: [MDT-OSD] RE: MDT Litetouch offline media IF you are still having problems making a USB flash drive bootable, don’t forget the Rufus tool J : https://rufus.akeo.ie -k From: [email protected] [ mailto:[email protected] ] On Behalf Of Daniel Franciscus Sent: Monday, January 11, 2016 9:55 AM To: [email protected] Subject: Re: [MDT-OSD] RE: MDT Litetouch offline media Ah, I initially tried that but I did not have success. Seems like it should work though so I will try again. Thanks! Dan Franciscus Systems Administrator Information Technology Group Institute for Advanced Study 609-734-8138 From: "Bain.John" < [email protected] > To: [email protected] Sent: Monday, January 11, 2016 12:50:28 PM Subject: [MDT-OSD] RE: MDT Litetouch offline media You want a Lite touch bootable ISO, you’ve probably already built one and dont realize it. https://technet.microsoft.com/en-us/library/dn781086.aspx Step 4-1: Create the LTI Bootable Media You need to provide a method for starting the computer with the customized version of Windows PE you created when you updated the deployment share. The Deployment Workbench creates the LiteTouchPE_x64.iso and LiteTouchPE_x64.wim files (for 64-bit target computers) or LiteTouchPE_x86.iso and LiteTouchPE_x86.wim files (for 32-bit target computers) in the deployment_share \Boot folder (where deployment_share is the network shared folder used as the deployment share). Create the appropriate LTI bootable media from one of these images. To create the LTI bootable media 1. In Windows Explorer, go to C:\DeploymentShare$\Boot. 2. Based on the type of computer used for the reference computer (WDG-REF-01), perform one of the following tasks: * If the reference computer is a physical computer, create a physical CD or DVD of the LiteTouchPE_x64.iso or LiteTouchPE_x86.iso file. * If the reference computer is a VM, start the VM directly from the LiteTouchPE_x64.iso or LiteTouchPE_x86.iso file or from a CD or DVD of the International Standard Organization (ISO) files. From: [email protected] [ mailto:[email protected] ] On Behalf Of Daniel Franciscus Sent: January 11, 2016 12:41 PM To: [email protected] Subject: [MDT-OSD] MDT Litetouch offline media Hi all, Disclaimer: I am a bit of an MDT newbie. I would like to make a bootable USB of litetouch that would be used to connect to our MDT share and deploy an OS just like it does through PXE. When using the Advanced Configuration > Media method in MDT, it looks like it takes my existing MDT share and puts it all on an ISO which makes the ISO quite large since I have custom OS's and applications. What I would like to do is have a bootable USB that is essentially the same thing as my Lite Touch Windows PE (x64) used through PXE and doesnt require a copy of my existing MDT share. Any suggestions? Dan Franciscus Systems Administrator Information Technology Group Institute for Advanced Study 609-734-8138
