Have you checked whether the clients have successfully completed the scan after the sync? There's a report to see last scan state.
Regards, James Ong On 23 Jan 2016 06:29, "Murray, Mike" <[email protected]> wrote: > Still not getting any data on these. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Murray, Mike > *Sent:* Friday, January 15, 2016 2:23 PM > *To:* [email protected] > *Subject:* RE: [mssms] All recent software updates - required 0 in > console? > > > > Thanks, but neither appears to apply to our setup. :/ > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *James Ong > *Sent:* Friday, January 15, 2016 6:31 AM > *To:* [email protected] > *Subject:* Re: [mssms] All recent software updates - required 0 in > console? > > > > You may want to check these out if you have not: > > https://support.microsoft.com/en-us/kb/3112343 > > > http://blogs.technet.com/b/configurationmgr/archive/2015/04/15/support-tip-configmgr-2012-update-scan-fails-and-causes-incorrect-compliance-status.aspx > > Regards, > James Ong > > On 15 Jan 2016 08:09, "Murray, Mike" <[email protected]> wrote: > > I downloaded this month’s updates Tuesday. I initially had a failure > distributing to one of our DP’s, I re-ran and the content distributed > properly. I have deployed like I’ve done tons of times, but I’m seeing none > as being required and clients are not getting updates. The things I found > on Google were no help. The only change that has been made in our > environment was upgrading from 2012 R2 to 2012 R2 SP1 CU2. > > > > > > > > Best Regards, > > > > Mike Murray > > Desktop Management Coordinator - IT Support Services > > California State University, Chico > > 530.898.4357 > [email protected] > > > > > > > > > >
