And also with *MigUser.xml* mapped drives not restoring ..do we need to add custom xml fro MapDrivers
On Mon, Jan 25, 2016 at 9:29 AM, Kevin Ray <[email protected]> wrote: > Thanks Jason, > > > I just gone trough it > > *https://technet.microsoft.com/en-us/library/ff383238(v=ws.10).aspx#BKMK_MigUser > <https://technet.microsoft.com/en-us/library/ff383238(v=ws.10).aspx#BKMK_MigUser>* > > > In Below if i understood correctly, > > *1. irrespective of file type extensions from standard user profile ,it > will gather all documents ?* > *2. I just want to gather the Standard user profile not all (like *Files > with the following extensions* sections ).. If i remove this section and > create a custom **settings will it wont gather ?* > > Overview of the MigUser.xml file > > *The MigUser.xml file includes instructions for USMT 4.0 to migrate user > files based on file name extensions. You can use the MigUser.xml file with > the ScanState and LoadState tools to perform a more targeted migration than > using USMT without XML instructions. The MigUser.xml file will gather all > files from the standard user-profile folders, as well as any files on the > computer with the specified file name extensions.* > > *The default MigUser.xml file migrates the following:* > > - > > *All files from the standard user-profile folders which are described as: * > - > > *CSIDL_MYVIDEO * > - > > *CSIDL_MYMUSIC * > - > > *CSIDL_DESKTOP * > - > > *CSIDL_STARTMENU * > - > > *CSIDL_PERSONAL * > - > > *CSIDL_MYPICTURES * > - > > *CSIDL_FAVORITES * > - > > *CSIDL_QUICK LAUNCH * > - > > > > *Files with the following extensions: .qdf, .qsd, .qel, .qph, .doc*, > .dot*, .rtf, .mcw, .wps, .scd, .wri, .wpd, .xl*, .csv, .iqy, .dqy, .oqy, > .rqy, .wk*, .wq1, .slk, .dif, .ppt*, .pps*, .pot*, .sh3, .ch3, .pre, .ppa, > .txt, .pst, .one*, .vl*, .vsd, .mpp, .or6, .accdb, .mdb, .pub * > > *The default MigUser.xml file does not migrate the following:* > > - > > *Files tagged with both the hidden and system attributes. * > - > > *Files and folders on removable drives, * > - > > *Data from the %WINDIR%, %PROGRAMFILES%, %PROGRAMDATA% folders. * > - *ACLS for files in folders outside the user profile.* > > > > > > > > _________________________________________________________________________ > > > And I want to capture only data from > > > > *All files from the standard user-profile folders which are described as:* > > - > > *CSIDL_MYVIDEO * > - > > *CSIDL_MYMUSIC * > - > > *CSIDL_DESKTOP * > - > > *CSIDL_STARTMENU * > - > > *CSIDL_PERSONAL * > - > > *CSIDL_MYPICTURES * > - > > *CSIDL_FAVORITES * > - > *CSIDL_QUICK LAUNCH * > > > I don't want capture anything from C drive .. Other then C:\user folders > (which are related to user profile) > > > What should be the Xml files...(i'm just guessing like copy the *MigUser.XML > and i will create Miguser2.xml *where I will remove all extension files > will it work when I call in the task sequence *Miguser2.xml *? > ? > > > ________________ > > Thanks and Regards > Kevin > > > > > i just called the *MigUser.xml* in Task sequence to capture the User > settings . Its getting failed ..can any one have the sample Xml file to > > On Fri, Jan 15, 2016 at 10:01 AM, Jason Condo <[email protected]> > wrote: > >> Also, just because ConfigMgr or MDT gives you a pre-canned step that runs >> the commandlines for you, doesn’t mean that you have to use it or can’t >> create your own step using a script that runs a custom command for capture >> or restore that meets your needs. >> >> >> >> You would still use the request state store and release state store steps. >> >> >> >> *Jason Condo *| *Bennett Adelson <http://www.bennettadelson.com/>* >> | Cleveland Region >> >> *Principal Consultant – Systems Management & Operations* >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Kevin Ray >> *Sent:* Friday, January 15, 2016 10:55 AM >> *To:* mssms <[email protected]> >> *Subject:* Re: [mssms] USMT - Profile migration customization >> >> >> >> thanks for info, let me check on that :) >> >> >> >> On Fri, Jan 15, 2016 at 9:48 AM, Jason Condo <[email protected]> >> wrote: >> >> You can read up on USMT here: >> >> https://technet.microsoft.com/en-us/library/dd560793(v=ws.10).aspx >> >> >> >> In your task sequence, under the step for capturing user state, you can >> specify the XML files you want to use. Same for the Restore User State >> step. The following link provides technical information to managing it in >> ConfigMgr. https://technet.microsoft.com/en-us/library/hh397289.aspx >> >> >> >> I would recommend understanding how USMT works outside of ConfigMgr so >> that you can understand how ConfigMgr leverages it. >> >> >> >> >> >> >> >> >> >> *Jason Condo *| *Bennett Adelson <http://www.bennettadelson.com/>* >> | Cleveland Region >> >> *Principal Consultant – Systems Management & Operations* >> >> >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Kevin Ray >> *Sent:* Friday, January 15, 2016 10:07 AM >> *To:* mssms <[email protected]> >> *Subject:* Re: [mssms] USMT - Profile migration customization >> >> >> >> I just want User profiles nothing else from *C drive folders* but if any >> documents on user profile desktop of documents and setting , IE settings , >> favorites,etc also wanted >> >> >> >> On Fri, Jan 15, 2016 at 9:02 AM, Kevin Ray <[email protected]> >> wrote: >> >> Hi All, >> >> >> >> With SCCM USMT we are able to do the refresh (complete Machine restore >> )... How ever now we required just the User profile migration .. >> >> >> >> So how to exclude that (like we need users documents and settings, >> profile setting not the C drive Folders and files >> >> >> >> any help >> >> >> >> >> >> >> >> >> >> >> >> >> >> > >
