Yup it is there: [cid:[email protected]]
And when I go to: C:\ConfigManager\CCM\Incoming the same content files are there and permission looks to be the same (whether it is correct I am not 100% sure) but if it is access denied, then I am not sure why that would happen. KEVIN JOHNSTON From: [email protected] [mailto:[email protected]] On Behalf Of Damien Solodow Sent: Tuesday, February 02, 2016 2:24 PM To: [email protected] Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 IIS Manager on the Site Server would be my first stop. ☺ DAMIEN SOLODOW Senior Systems Engineer 317.447.6033 (office) 317.447.6014 (fax) HARRISON COLLEGE From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: Tuesday, February 2, 2016 2:21 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 Well this is an upgrade from 2012 R2 SP1 so the assumption is yes. I did not change anything. Where would I go to confirm this? KEVIN JOHNSTON Intermediate Systems Administrator, Corp IT HALOGEN SOFTWARE Strategic Talent Management Made Easy T +1 613-270-1011 Ext. 4450 F +1 613-270-8311 C +1 613-301-1597 From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Damien Solodow Sent: Tuesday, February 02, 2016 2:16 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 80070005 is access denied. Does those virtual directories already exist? DAMIEN SOLODOW Senior Systems Engineer 317.447.6033 (office) 317.447.6014 (fax) HARRISON COLLEGE From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: Tuesday, February 2, 2016 2:13 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 This is what it says: MSI (s) (74!FC) [13:27:24:334]: Product: ConfigMgr Management Point -- Error 25006. Setup was unable to create the Internet virtual directory CCM_Incoming The error code is 80070005 Error 25006. Setup was unable to create the Internet virtual directory CCM_Incoming The error code is 80070005 CustomAction CcmCreateIISVirtualDirectories returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox) KEVIN JOHNSTON From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Qadri, Syed Sent: Tuesday, February 02, 2016 2:09 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 Since this is a fetal error (1603). Open the mpmsi.log and then search for the keyword “return value 3”. The line above this will tell you exactly why it is failing. Syed. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: Wednesday, February 03, 2016 12:36 AM To: '[email protected]' Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 No it is on my Primary SCCM server. I only have one MP. Before I started digging, I was trying to upgrade a client, and the errors where saying that it couldn’t connect to the MP. I then went to Monitoring – Site Status and noticed it said Critical. I then found where it was giving me errors, which then after some googling lead me to the MP logs. It currently still says Critical The error : MP Control Manager detected MPsetup has failed to create the CCM_Incoming Virtual Directory. Then it gives some suggestions which everyone says to do the things I have done.. Now I also have issues with my SUP and Application Catalog web service point Going from bad to worse.. KEVIN JOHNSTON Intermediate Systems Administrator, Corp IT HALOGEN SOFTWARE Strategic Talent Management Made Easy T +1 613-270-1011 Ext. 4450 F +1 613-270-8311 C +1 613-301-1597 From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Andrew Craig Sent: Tuesday, February 02, 2016 1:58 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Epic fail on upgrading to v1511 from 2012 R2 SP1 This MP is on a remote site server? How is the MP on the site server looking? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: 02 February 2016 19:47 To: '[email protected]' <[email protected]<mailto:[email protected]>> Subject: [mssms] Epic fail on upgrading to v1511 from 2012 R2 SP1 So I had everything in place and it looked like my upgrade was great until I say some errors then I started to dig a bit deeper… So currently my biggest issues is the MP will not install. I mean it was already there, but I guess during the upgrade that failed. So I went on a mad hunt to figure out the issue, and I read things from WMI to BITS to IIS. So I removed the agent (did a PS script to remove from WMI) I uninstalled BITS Uninstalled IIS Reinstalled IIS (web Services and BITS) and I still get the same issue in the mpmsi.log and MPSetup.log MPMSI.log: MSI (s) (A0:C4) [12:09:12:936]: Product: ConfigMgr Management Point -- Installation operation failed. MSI (s) (A0:C4) [12:09:12:937]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.8325.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603. MPSetup.log: <02/02/16 11:04:12> No versions of SMSMP are installed. Installing new SMSMP. <02/02/16 11:04:12> Enabling MSI logging. mp.msi will log to C:\ConfigManager\logs\mpMSI.log <02/02/16 11:04:12> Installing C:\ConfigManager\bin\x64\mp.msi CCMINSTALLDIR="C:\SMS_CCM" CCMSERVERDATAROOT="C:\ConfigManager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 <02/02/16 11:04:46> mp.msi exited with return code: 1603 <02/02/16 11:04:46> Backing up C:\ConfigManager\logs\mpMSI.log to C:\ConfigManager\logs\mpMSI.log.LastError <02/02/16 11:04:46> Fatal MSI Error - mp.msi could not be installed. <02/02/16 11:04:46> ~RoleSetup(). I have no idea why this is not installing. If I run the mp.msi I get the following error: Internet information Services Web support is either not installed or is not configured correctly. I know that seems like it tells me, but I can’t figure out which of it is not configured. This also was the case BEFORE I did any uninstalling and fixing. KEVIN JOHNSTON This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.
