Sounds like they are fine then. They're not going to reboot unless they have to.

From: [email protected] [mailto:[email protected]] On 
Behalf Of Kevin Johnston
Sent: Thursday, February 25, 2016 3:13 PM
To: '[email protected]' <[email protected]>
Subject: [mssms] RE: Maintenance Windows and reboots

Ours is unchecked.

So what happens is out of the 29 test servers a hand full of them actually 
rebooted without issues, and the rest didn't reboot.
When I looked at the updates that were installed, none of the updates needed a 
reboot, so the servers didn't ... at least that is my assumption at this point.

If I am not mistaken, one of the servers only install Silverlight, which no 
reboot is required.

Is CM programmed to reboot within that MW regardless? It seems to me it is 
supposed to reboot if the update tells CM to reboot.

KEVIN JOHNSTON

From: [email protected]<mailto:[email protected]> 
[mailto:[email protected]] On Behalf Of Murray, Mike
Sent: Thursday, February 25, 2016 5:10 PM
To: [email protected]<mailto:[email protected]>
Subject: [mssms] RE: Maintenance Windows and reboots

You don't have this box checked on your deployment by chance, do you?

[cid:[email protected]]

From: [email protected]<mailto:[email protected]> 
[mailto:[email protected]] On Behalf Of Kevin Johnston
Sent: Thursday, February 25, 2016 1:44 PM
To: '[email protected]' 
<[email protected]<mailto:[email protected]>>
Subject: [mssms] Maintenance Windows and reboots

I am still testing out using Maintenance Windows in our company for servers.

When we did our trial run, I noticed that not all the servers rebooted. Upon 
further inspection it looks like the updates that were applied did not need to 
reboot the server.

Just curious how others "force" a reboot (automatically), as it is always nice 
to reboot servers when you can, I was hoping that the MW would force a reboot 
regardless. But it seems once this happens I need to then go back in and see 
which ones did not reboot and manually do it.

We don't have a lot so it is not too bad, but I am trying to automate it as 
much as possible.

I don't have Orchestrator or anything that can do this. It would be nice I 
guess if you could force the reboot on the servers.

Any tips, tricks or suggestions.

KEVIN JOHNSTON







Reply via email to