Have you tried adding the driver via drvload Sent from my phone, please excuse any typo's as a result.
> On 09 Apr 2016, at 22:50, Jeff Poling <jeffrey.d.pol...@outlook.com> wrote: > > It's BIOS, not UEFI. . .unfortunately. > > Date: Fri, 8 Apr 2016 06:49:28 +0200 > Subject: Re: [mssms] WinPE unattend.xml > From: any...@gmail.com > To: ms...@lists.myitforum.com > > if it's an UEFI device try this workaround > > https://www.niallbrady.com/2015/04/28/how-can-i-set-video-resolution-correctly-during-uefi-network-boot-dynamically-in-system-center-2012-r2-configuration-manager/ > > On Thu, Apr 7, 2016 at 10:17 PM, Daniel Ratliff <dratl...@humana.com> wrote: > Could it be this issue? Maybe try lower settings. > > > > http://deploymentresearch.com/Research/Post/256/Setting-screen-resolution-in-WinPE-4-0 > > > > Daniel Ratliff > > > > From: listsadmin@lists.myitforum.com [mailto:listsadmin@lists.myitforum.com] > On Behalf Of Jeff Poling > Sent: Thursday, April 07, 2016 4:04 PM > > > To: ms...@lists.myitforum.com > Subject: RE: [mssms] WinPE unattend.xml > > > > Thanks, Daniel. I did that but didn't get the hoped for result....the video > doesn't display and the monitor complains about an unsupported input > configuration. > > Jeff > > Sent from my Windows Phone > > From: Daniel Ratliff > Sent: 4/7/2016 2:28 PM > To: ms...@lists.myitforum.com > Subject: RE: [mssms] WinPE unattend.xml > > Easy. Just put it in the root of your boot image .wim. > > http://www.top-password.com/blog/how-to-change-screen-resolution-in-windows-pe-4-and-5/ > > > Daniel Ratliff > > > From: listsadmin@lists.myitforum.com [mailto:listsadmin@lists.myitforum.com] > On Behalf Of Jeff Poling > Sent: Tuesday, April 05, 2016 4:26 PM > To: ms...@lists.myitforum.com > Subject: [mssms] WinPE unattend.xml > > I need to include video resolution settings in our ConfigMgr boot image. How > do I include an unattend.xml? It's straightforward for USB media but not > PXE.... > > Thanks, > > Jeff > > Sent from my Windows Phone > > > The information transmitted is intended only for the person or entity to > which it is addressed > and may contain CONFIDENTIAL material. If you receive this > material/information in error, > please contact the sender and delete or destroy the material/information. > > > > > The information transmitted is intended only for the person or entity to > which it is addressed > and may contain CONFIDENTIAL material. If you receive this > material/information in error, > please contact the sender and delete or destroy the material/information. > > > >
