Mike & All, I know there was some talk a while back on interfacing with the Alltrax controller to acquire data from it, for applications other than ControllerPro. I have the document that was floating around on the basic commands, but was wondering if anyone had actually fully decoded the Alltrax commands. Such as, which hex to submit for which value (V, A, etc...)
Matt Graham and I are working a test load bank system for cycling batteries and are using an Alltrax controller to help with managing the load side of the test system. A PC based data acquisition and control system will monitor the batteries and regulate the load, from a 1C discharge rate to over 50C (short durations) and record all the values. If anyone can offer up any assistance it would be happily welcomed. Thanks! Shawn Waggoner
