Re: [FLEAA] EV build

Jerry Wagner Mon, 11 Feb 2008 13:12:23 -0800

My advice is don't do it. You will reduce the value of the car as a restored vehicle.

But if you do, the AC motors are more expensive up front, and you will need to go with more voltage than 120 volts. Usually about 300 volts for AC controllers. If you have about $20,000 to spend on the car talk to Metric Mind.com for the best set up.

Jerry Wagner

-----Original Message-----
From: William Lambrigger <[EMAIL PROTECTED]>
Sent: Feb 11, 2008 2:26 PM
To: [email protected]
Subject: [FLEAA] EV build

I'm new to this so I hope I'm in the correct place.

I'm looking to convert my fully restored 66 mustang convertible to electric and would like some advice as to what to use. I think I'd like to go AC with regenerative braking with a 120 Volt system. Any help would be appreciated.

Thanks in advance,

Scott.

_______________________________________________
Florida EAA mailing list
[email protected]
http://www.floridaeaa.org

Re: [FLEAA] EV build

Reply via email to