I have heard of them, they call them Siamese when they connect them together
on the same shaft, google it, heres a link to the white zombie. also ask
steve in ft pierce.he's a master,
http://photos.plasmaboyracing.com/buildsequence?page=1
good luck!
Bern
----- Original Message -----
From: "Matt Graham" <[email protected]>
To: "FLEAA Mailing List" <[email protected]>
Sent: Wednesday, December 17, 2008 5:43 PM
Subject: Re: [FLEAA] Converting an S-10?
The motors in my 240SX are coupled end to end with a double row chain
coupling. You can see some pictures of the motor setup at
www.jouleinjected.com.
The output of the rear motor is hooked directly to the driveshaft.
Matt Graham
-----Original Message-----
From: "Jeremiah Johnson" <[email protected]>
Date: Wed, 17 Dec 2008 14:08:16
To: FLEAA Mailing List<[email protected]>
Subject: [FLEAA] Converting an S-10?
Does anyone have any idea of how to possibly hook two motors up to a car
driveline? I'm doing a couple of motors in series with my next motorcycle
build, but that is pretty easy. I'm just facing the two output shafts
together and connecting them, with one sprocket between them and the chain
running out to the rear sprocket. Looking for ideas to somehow make this
work in a truck or car. I'm thinking about doing a conversion on a s-10.
_______________________________________________
Florida EAA mailing list
[email protected]
http://www.floridaeaa.org
_______________________________________________
Florida EAA mailing list
[email protected]
http://www.floridaeaa.org
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.19/1853 - Release Date: 12/17/2008
8:31 AM
_______________________________________________
Florida EAA mailing list
[email protected]
http://www.floridaeaa.org
