Unfortunatelly the camera doesn't use RTSP. I can specify to use multicast or unicast by CGI commands and I can start streaming with CGI commands too. I would like to use unicast, so I don't know what to do.
On Tue, May 6, 2008 at 3:08 PM, Ross Finlayson <[EMAIL PROTECTED]> wrote: > > > > I have a Sony camera which can stream MPEG4/H264 video using RTP > > protocol. I was able to receive the MPEG-4 stream, but unfortunatelly > > I don't know what payload format should I specify for > > H264VideoRTPSource. Can anybody help me? > > > > The camera should produce a SDP description that describes (among other > things) the RTP payload format code used by the stream. Does the camera > have a built-in RTSP server? If so, you don't need to worry about this; the > RTSP protocol (and our software) will take care of this automatically (just > provide the "rtsp://" URL to the client). > > If your camera doesn't use RTSP, then it probably streams using multicast, > and the multicast address, port, and RTP payload format code should be part > of a SDP description which the camera should produce. > -- > > Ross Finlayson > Live Networks, Inc. > http://www.live555.com/ > _______________________________________________ > live-devel mailing list > [email protected] > http://lists.live555.com/mailman/listinfo/live-devel > _______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
