Hi Sehgal, U must have Ip address of the System wehere Darwin Server is running . by default the Darwin Server uses port 554 . so first develop one application that will connect with Darwing Server over TCP on (port and ip) . Once the Tcp connection is done .... Let me Know We will Discuss further .....
Thanks and Regards Rajesh Kumar Sr. Software Engineer R & D - Network Group ImiMobile Pvt Ltd +91 40 23555945 - 235 +91 99084 00027 www.imimobile.com ----- Original Message ----- From: Rakesh Sehgal To: LIVE555 Streaming Media - development & use Sent: Monday, June 02, 2008 5:35 PM Subject: Re: [Live-devel] Creating RTSP messages Thanks for such a prompt reply. Yes, I do want to develop a RTSP client. I have been through the RTSP RFC, but the problem is that I don't know how to send messages to the server. I know the format (from RFC), but I have no idea about how to create those packetes using C++ or java and then send them to the server, so that it understands them. Rakesh Sehgal =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you ------------------------------------------------------------------------------ _______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
_______________________________________________ live-devel mailing list [email protected] http://lists.live555.com/mailman/listinfo/live-devel
